Honeywell TrueDRY DR65A2000 Dehumidifier Manual

The Honeywell TrueDRY DR65A2000 is a high-capacity dehumidifier designed for residential use, capable of removing up to 65 pints of moisture per day. It features automatic humidity control, continuous drainage option, washable air filter, digital controls with LED display, auto-restart after power interruption, and a 24-hour timer. Ideal for basements, living areas, and other spaces up to 4,500 sq ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Digital control panel, Water tank with full indicator, Continuous drain port, Washable air filter, Casters for mobility, Handle for carrying.

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

1. Choose location: Place in center of room, away from walls/furniture (at least 12-18 inches clearance).
2. Ensure proper airflow: Keep air intake and exhaust grilles unobstructed.
3. Check power source: Use dedicated 115V AC, 60Hz outlet; avoid extension cords.
4. Install drain hose (optional): Attach standard garden hose to drain port for continuous drainage.

WARNING! Do not place in closets or enclosed spaces. Ensure room temperature is between 41°F and 95°F for optimal performance.

First-Time Setup

Plug into power outlet; unit will beep and display will light up.

1. Set humidity level: Press HUMIDITY button to select desired level (recommended 45-50%).
2. Select mode: Press MODE for Auto, Continuous, or Turbo operation.
3. Set timer (optional): Press TIMER to program start/stop times.
4. Insert air filter: Ensure washable filter is properly installed.
5. Place empty water tank: Slide tank into position until it clicks.

CAUTION! Handle water tank with care; avoid tipping unit when tank is full.

Specifications

• Model: DR65A2000
• Moisture Removal: 65 pints per day (at 80°F, 60% RH)
• Coverage Area: Up to 4,500 square feet
• Operating Temperature: 41°F to 95°F
• Humidity Control Range: 35% to 85% RH
• Water Tank Capacity: 1.6 gallons
• Air Flow: 188 CFM
• Power Supply: 115V AC, 60Hz, 6.5A
• Noise Level: ≤ 51 dB
• Dimensions (HxWxD): 24.2" x 15.4" x 11.4"
• Weight: 41.9 lbs

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY, TIMER, FAN SPEED, TURBO, FILTER RESET.

Display Icons: Power, Mode, Humidity %, Timer, Full Tank, Filter, Turbo.

Modes: AUTO (maintains set humidity), CONTINUOUS (runs constantly), TURBO (max dehumidification). Fan Speed: HIGH/LOW (adjustable in Auto mode). Timer: Set 1-24 hours for automatic on/off. Humidity Setting: Adjust in 5% increments. Filter Reset: Press after cleaning filter.

Operation Modes

Auto Mode: Unit cycles on/off to maintain set humidity level. Continuous Mode: Runs constantly until turned off or tank is full. Turbo Mode: Runs at maximum fan speed for fastest moisture removal.

1. Press POWER to turn on.
2. Press MODE to cycle through Auto, Continuous, Turbo.
3. In Auto mode, press HUMIDITY to set target humidity (35%-85%).
4. Press FAN SPEED to select High or Low (in Auto mode only).
5. Press TURBO for maximum dehumidification (overrides other settings).

Tip: Use Auto mode for energy efficiency; Turbo for quickly reducing high humidity.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean air filter every 2 weeks: Remove, wash with warm water, dry completely, reinstall.
2. Empty water tank: When full indicator lights, pull tank straight out, empty, replace.
3. Clean exterior: Unplug unit, wipe with damp cloth; do not use harsh chemicals.
4. Clean water tank monthly: Wash with mild detergent, rinse thoroughly.
5. End-of-season storage: Empty tank, run in Fan mode for 30 minutes to dry internals, store upright in dry place.

WARNING! Always unplug before cleaning. Never immerse unit in water.

Drainage Options

Two drainage methods: Manual (water tank) or Continuous (hose).

Manual Drainage: Use included 1.6-gallon tank. When full indicator lights, remove tank, empty, replace. Ensure tank is properly seated.

Continuous Drainage: Attach standard garden hose (¾" inner diameter, not included) to drain port at back. Place hose end lower than drain port for gravity flow. Ensure hose is not kinked.

CAUTION! For continuous drainage, ensure hose path is downward without loops to prevent water backup.

Energy Saving Tips

• Set humidity to 45-50% for comfort and efficiency.
• Use Auto mode instead of Continuous when possible.
• Keep doors and windows closed during operation.
• Clean air filter regularly to maintain airflow.
• Use timer to run during peak humidity hours only.
• Ensure room is properly insulated to reduce workload.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ETL Listed to safety standards. Copyright © Honeywell International Inc. For support, visit www.honeywellhome.com or contact 1-800-332-1110. This product contains refrigerant R-410A. Dispose of according to local regulations.

Troubleshooting

Reset: Unplug for 10 minutes to reset control system.

Service: 1-800-332-1110; www.honeywellhome.com