Honeywell TPFIT50AWK Dehumidifier Manual

The Honeywell TPFIT50AWK is a 50-pint portable dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drain option, washable air filter, auto-restart after power interruption, full bucket alert with auto-shutoff, turbo mode for faster dehumidification, and 24-hour timer. Operates on 115V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Dehumidifier unit with built-in humidistat, removable water bucket, washable filter, control panel, continuous drain hose port, casters for mobility, and handle.

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

1. Choose location: Place in center of room or area with high humidity, away from walls and furniture for proper airflow.
2. Check clearance: Ensure at least 12 inches of space on all sides, especially air intake and exhaust.
3. Prepare drain option: For bucket operation, ensure bucket is securely inserted. For continuous drain, attach hose to drain port and route to floor drain or sink.
4. Plug into grounded 115V AC outlet.

WARNING! Do not use in temperatures below 41°F (5°C). Ensure unit is upright for at least 24 hours before first use if tilted during transport.

First-Time Setup

Power on dehumidifier; set initial preferences.

1. Set humidity level: Press HUMIDITY button to select desired relative humidity (recommended 45-50%).
2. Select mode: Choose NORMAL or TURBO via MODE button.
3. Set timer (optional): Use TIMER button to program automatic on/off times.
4. For continuous drain: Insert drain hose securely into port; ensure hose is downward sloping without kinks.

CAUTION! Handle water bucket with care to avoid spills. Empty bucket before first use.

Specifications

• Model: TPFIT50AWK
• Dehumidification Capacity: 50 pints/day (at 80°F, 60% RH)
• Coverage Area: Up to 3000 sq. ft. (depending on conditions)
• Operating Temperature: 41°F to 95°F (5°C to 35°C)
• Humidity Range: 35% to 85% RH (adjustable)
• Water Bucket Capacity: 1.6 gallons (6 liters)
• Air Flow: High and Turbo settings
• Power Source: 115V AC, 60Hz, 4.5A
• Noise Level: ≤ 51 dB(A) on normal mode
• Dimensions (HxWxD): 23.6" x 15.4" x 11.8"
• Weight: 40.8 lbs

Controls and Settings

Access controls via front panel buttons and LED display.

Control Panel: POWER, MODE (Normal/Turbo), HUMIDITY (up/down), TIMER, FILTER RESET.

Display Indicators: Current humidity, set humidity, timer status, filter alert, bucket full, turbo mode.

Humidity Control: Adjust set point between 35% and 85% RH. Unit cycles on/off automatically to maintain set level.

Timer: Program on/off times in 1-hour increments up to 24 hours.

Filter Alert: LED illuminates when filter needs cleaning (approximately every 250 hours of operation).

Operating Modes

Normal Mode: Standard dehumidification with balanced fan speed and energy use. Turbo Mode: Maximum dehumidification with higher fan speed for rapid moisture removal.

1. Power on: Press POWER button.
2. Select mode: Press MODE to toggle between NORMAL and TURBO.
3. Set humidity: Press HUMIDITY up/down to desired level.
4. Monitor: Display shows current room humidity; compressor runs when humidity exceeds set point.
5. Water removal: Empty bucket when FULL indicator lights, or use continuous drain.

Tip: For energy savings, set humidity to 50% or higher when room is unoccupied.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean air filter: Remove filter every 2-4 weeks (or when FILTER light illuminates). Wash with warm water and mild detergent, dry completely before reinstalling. Press FILTER RESET button after cleaning.
2. Empty water bucket: Remove bucket by lifting handle, empty water, clean with mild detergent, dry, and reinsert securely.
3. Clean exterior: Unplug unit. Wipe cabinet with soft, damp cloth. Do not use abrasive cleaners.
4. Check drain hose: If using continuous drain, ensure hose is clear of debris and properly connected.
5. End-of-season cleaning: Follow storage instructions below.

WARNING! Always unplug unit before cleaning. Never immerse unit in water.

Storage & Winterization

If not using for extended period (e.g., winter):

1. Unplug unit and empty water bucket completely.
2. Clean filter and bucket as described above; ensure all parts are dry.
3. Coil power cord neatly and secure with twist tie.
4. Store upright in cool, dry place, protected from dust and extreme temperatures.
5. Cover with cloth or plastic bag to prevent dust accumulation.

CAUTION! Do not store with water in bucket or lines to prevent mold and damage.

Safety Information

Read all safety instructions before operation.

• Use only 115V AC grounded outlet. Do not use extension cord.
• Do not operate in temperatures below 41°F (5°C); coil may frost.
• Keep unit away from flammable materials and sources of ignition.
• Do not block air intake or exhaust grilles.
• Empty bucket promptly when full to prevent overflow.
• Do not attempt to repair unit yourself; contact authorized service.
• This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, unless supervised.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ETL Listed. Meets applicable U.S. safety standards. For support, visit www.honeywellhome.com or contact Honeywell Customer Care at 1-800-332-1110.

Troubleshooting

Reset: Unplug unit for 10 minutes to reset control system.

Service: 1-800-332-1110; www.honeywellhome.com