Honeywell TPFIT50APWK Dehumidifier Manual

The Honeywell TPFIT50APWK is a 50-pint portable dehumidifier designed for medium to large rooms, featuring an Energy Star certification, digital humidity readout, auto defrost, continuous drain option, washable filter, and quiet operation. It helps control moisture to improve air quality and comfort. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Storage 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, 50-pint capacity tank, washable air filter, continuous drain hose port, casters for mobility, and auto shut-off.

Feature	Description
Digital Humidity Display	Shows current room humidity and set target
Auto Defrost	Prevents coil freezing in low temperatures
Continuous Drain Option	Allows connection of hose for unattended operation
Washable Filter	Captures airborne particles; reusable
Quiet Operation	Designed for low noise in living spaces
Energy Star Certified	Energy efficient operation
Full Tank Alert	Indicator light and auto shut-off when tank is full
24-Hour Timer	Program on/off cycles
Turbo Mode	Maximum moisture removal speed
Portable Design	Built-in handles and casters for easy movement

Installation & Placement

Unpack and inspect contents. Place on level, stable floor.

Choose location: Place in center of room or area with high humidity, away from walls/furniture for airflow.
Check clearance: Ensure at least 12 inches of space on all sides, especially air intake and exhaust.
Position drain hose (optional): Attach hose to drain port for continuous drainage to floor drain or sink.
Plug into grounded 120V AC outlet.

WARNING! Do not use in temperatures below 41°F (5°C). Ensure power cord is not pinched or damaged.

First-Time Setup

Plug in unit; control panel will illuminate.

Set target humidity: Press HUMIDITY SET button to desired level (40-60% recommended).
Select mode: Choose CONTINUOUS, AUTO, or TURBO based on needs.
Set timer (optional): Use TIMER button to program start/stop times.
Check filter: Ensure washable filter is clean and properly installed.

CAUTION! Handle water tank with care; empty before moving unit.

Specifications

Capacity: 50 pints per day (at 80°F, 60% RH).
Coverage: Up to 3000 sq ft (medium to large rooms).
Operating Temperature: 41°F to 95°F (5°C to 35°C).
Tank Size: Removable 1.8-gallon bucket.
Power: 120V, 60Hz, 4.5A.
Noise Level: ≤ 51 dB on low speed.
Dimensions: Approx. 15.4" D x 19.7" W x 24.4" H.
Weight: 40.8 lbs.
Certifications: Energy Star, ETL listed.

Controls and Settings

Control Panel: POWER, MODE (Continuous/Auto/Turbo), HUMIDITY SET (+/-), TIMER, FILTER ALERT light, FULL TANK light.

Remote (if included): POWER, MODE, HUMIDITY, TIMER, TURBO.

Humidity Control: Set target 35%-85% in 5% increments. Timer: Program 1-24 hours for auto on/off. Mode: AUTO (maintains set humidity), CONTINUOUS (runs until tank full/turned off), TURBO (max dehumidification). Filter Alert: Light indicates when filter needs cleaning.

Operation Modes

Auto: Unit cycles on/off to maintain set humidity. Continuous: Runs constantly until tank fills or power off. Turbo: Highest fan speed for fastest moisture removal.

Press POWER to turn on.
Select MODE to choose Auto, Continuous, or Turbo.
Adjust humidity setting with +/- buttons.
Monitor tank; empty when FULL light illuminates.

Tip: Use Continuous mode for initial moisture removal in very damp conditions.

Maintenance & Cleaning

Unplug unit before maintenance.

Empty water tank: Remove, pour out water, replace securely.
Clean filter: Remove washable filter every 2 weeks; rinse with water, air dry completely.
Clean exterior: Wipe with soft, damp cloth; do not use chemicals.
Check drain hose: Ensure continuous drain hose is clear of clogs if used.

WARNING! Never immerse unit in water. Do not operate without filter installed.

Storage

If not using for extended period:

Unplug and empty tank completely.
Clean filter and let dry.
Run unit in Fan mode for 30 minutes to dry internal components.
Store in cool, dry place; cover to prevent dust.

CAUTION! Store upright; do not place heavy items on top.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	No power	Check outlet; ensure plug is secure; test outlet with another device.
Not removing moisture	Room temp too low/high	Ensure room temp between 41°F-95°F; check humidity setting.
Full tank light on (tank empty)	Float stuck	Remove tank, check float moves freely; reinstall tank level.
Water leaking	Tank not seated/drain hose	Ensure tank fully inserted; check drain hose connection.
Loud noise	Obstruction/filter dirty	Check for blockages in air vents; clean filter.
Filter light on	Dirty filter	Remove and clean washable filter; let dry completely.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-332-1110; www.honeywellhome.com