Honeywell TPFIT32WK Dehumidifier Manual

The Honeywell TPFIT32WK is a 32-pint portable dehumidifier designed for medium-sized rooms up to 1500 sq. ft. It features an auto-defrost function for low-temperature operation, a continuous drain option, a full-bucket alert with auto-shutoff, adjustable humidity control, a washable filter, and a 24-hour timer. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Draining Options 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable unit with built-in handle, Water Collection Bucket, Control Panel, Air Filter, Drain Hose Connector, Casters for mobility.

Feature	Description
Humidity Control	Adjustable digital humidistat (30% - 80% RH)
Auto Defrost	Prevents coil freezing in low temperatures (down to 41°F)
Continuous Drain	Option for hose connection (5/8" inner diameter)
Full Bucket Alert	Indicator light and auto-shutoff when bucket is full
24-Hour Timer	Program on/off cycles
Washable Filter	Removable air filter for easy cleaning
Portability	Built-in handle and casters for easy movement
Power Cord Storage	Integrated wrap for neat storage
Quiet Operation	Designed for low noise in living spaces
Energy Efficient	Energy Star certified model

Installation & Placement

Unpack and inspect contents. Place on a level, stable floor surface.

Choose Location: Place in center of room or area with high humidity, away from walls and furniture (at least 12 inches clearance).
Check Airflow: Ensure air inlet and outlet are unobstructed.
Level Surface: Unit must be level for proper bucket operation and to prevent leaks.
Power Connection: Plug directly into a grounded 115V AC outlet. Do not use extension cords.

WARNING! Do not place in closets or enclosed spaces. Ensure room temperature is between 41°F and 95°F for optimal operation.

First-Time Setup

Power on the dehumidifier; follow initial setup steps.

Insert Bucket: Ensure collection bucket is properly seated and clicks into place.
Set Humidity Level: Press the HUMIDITY button to set desired relative humidity (start at 50%).
Select Fan Speed: Choose between HIGH (fast dehumidification) or LOW (quiet operation).
Set Timer (Optional): Use TIMER button to program automatic start/stop times.
For Continuous Drain: Attach hose to drain port and route to floor drain or sink.

CAUTION! Handle bucket with care to avoid spills. Empty bucket before first use.

Specifications

Model: TPFIT32WK
Dehumidification Capacity: 32 pints per day (at 60°F, 60% RH)
Coverage Area: Up to 1500 square feet
Operating Temperature: 41°F to 95°F
Tank Capacity: 1.6 gallons (removable bucket)
Fan Speeds: 2 (High/Low)
Power Supply: 115V, 60Hz, 4.5A
Noise Level: ≤ 51 dB on Low setting
Dimensions (HxWxD): 15.4" x 11.4" x 19.9"
Weight: 33.5 lbs
Certifications: Energy Star, ETL Listed

Controls and Settings

Access controls via front panel digital display and buttons.

Control Panel: POWER, HUMIDITY SET (+/-), FAN SPEED (High/Low), TIMER (1-24 hours), FILTER ALERT reset.

Display Indicators: Current Humidity %, Set Humidity %, Full Bucket, Filter Clean, Defrost, Timer.

Settings: Humidity Control (30%-80% RH), Fan Speed (High for maximum moisture removal, Low for quiet operation), Timer (program on/off in 1-hour increments), Auto Restart (resumes previous settings after power outage).

Operation Modes

Normal Mode: Runs continuously until set humidity is reached, then cycles on/off automatically. Continuous Mode: Press and hold HUMIDITY button for 3 seconds to run continuously regardless of humidity level (for very damp conditions). Laundry Mode: High fan speed with continuous operation to dry laundry in same room. Timer Mode: Set unit to turn on/off at specific times (e.g., run during day, off at night).

Press POWER to turn on.
Set desired humidity with +/- buttons.
Select fan speed.
Monitor display for current room humidity.
Unit will auto-shutoff when bucket is full (indicator light will illuminate).

Tip: For fastest dehumidification, close windows and doors in the room.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Empty Bucket: Remove and empty water bucket when full or as needed. Clean with mild detergent monthly.
Clean Filter: Remove washable filter every 2 weeks (more often in dusty environments). Rinse under warm water, air dry completely before reinstalling. Press FILTER button for 3 seconds to reset alert.
Exterior Cleaning: Wipe cabinet with soft, damp cloth. Do not use harsh chemicals or abrasives.
Coil Cleaning: Gently vacuum condenser coils every 3 months to remove dust (unplug unit first).
End of Season: For storage, empty and clean bucket, clean filter, let unit run in fan-only mode for 1 hour to dry internal components, then unplug and store in dry place.

WARNING! Always unplug unit before cleaning. Never immerse in water.

Draining Options

Two methods for water removal: manual bucket emptying or continuous drain.

Manual (Bucket): Unit stops when bucket is full (indicator light). Pull bucket straight out, empty, and reinsert firmly until click is heard.

Continuous Drain:

Ensure unit is unplugged and turned off.
Remove bucket.
Attach standard 5/8" inner diameter garden hose to drain port (clockwise).
Route hose to floor drain, sink, or sump pump (ensure downward slope).
Replace bucket (required for proper operation even when using hose).
Plug in and turn on unit; water will flow continuously through hose.

CAUTION! Do not kink or elevate drain hose above unit. Check hose regularly for clogs.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. This product meets EPA Energy Star guidelines for energy efficiency. Copyright © Honeywell International Inc. For support, visit www.honeywellhome.com or contact 1-800-474-2147. Model TPFIT32WK is ETL listed to UL standard 474.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not start	No power, full bucket, timer set	Check outlet; empty bucket; check timer settings.
Little or no water collection	Low humidity, cold room, dirty filter	Check room humidity; ensure temp >41°F; clean filter.
Unit runs but stops frequently	Defrost cycle active, set humidity reached	Normal in cold rooms; adjust humidity setting lower.
Water leakage	Bucket not seated, hose connection loose	Remove and reinsert bucket; check hose connection.
Loud or unusual noise	Uneven surface, loose parts, dirty fan	Place on level floor; check for obstructions; contact service.
Filter light on	Filter needs cleaning	Clean filter and press FILTER button for 3 seconds to reset.
Display shows "E1" or "E2"	Sensor error	Unplug for 5 minutes, then restart. If persists, contact service.

Reset: Unplug unit for 5 minutes to reset electronic controls.

Service: 1-800-474-2147; www.honeywellhome.com