Honeywell TP70WKNR Dehumidifier Manual

The Honeywell TP70WKNR is a 70-pint capacity dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drainage option, washable air filter, auto-restart after power interruption, and digital controls with LED display. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operation Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, 70-pint water tank, washable filter, continuous drain hose, humidity sensor, and casters for mobility.

Feature	Description
Digital Control Panel	LED display with humidity readout and mode selection
70-Pint Capacity	Removes up to 70 pints per day at 65°F/60% RH
Automatic Humidity Control	Set desired humidity level (35%-85%)
Continuous Drain Option	Garden hose connection for unattended operation
Washable Air Filter	Captures dust and particles; reusable
Auto-Restart Function	Resumes previous settings after power outage
Full Tank Alert	Indicator light and auto-shutoff when tank is full
24-Hour Timer	Program on/off cycles
Casters	Four wheels for easy mobility
Turbo Mode	Maximum moisture removal for high humidity

Installation

Unpack and inspect contents. Place on level surface.

Position unit: Allow at least 12 inches clearance on all sides for airflow.
Install casters: Attach four wheels to bottom of unit.
Check filter: Ensure washable filter is properly installed.
Place water tank: Insert empty tank securely into unit.
Plug into grounded 120V AC outlet.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure proper ventilation.

First-Time Setup

Power on dehumidifier; follow control panel prompts.

Set humidity level: Press HUMIDITY button to select desired level (recommended 45-50%).
Select mode: Choose AUTO (recommended), CONTINUOUS, or TURBO.
Set timer (optional): Use TIMER button to program on/off schedule.
Check drainage: For continuous use, attach drain hose to outlet.

CAUTION! Place on level surface to prevent water leakage. Do not block air vents.

Specifications

Capacity: 70 pints per day (at 65°F/60% RH).
Coverage Area: Up to 4,500 sq. ft. (depending on humidity).
Operating Temperature: 41°F to 95°F (5°C to 35°C).
Water Tank Capacity: 16.9 pints (2.1 gallons).
Power Consumption: 745W (maximum).
Voltage: 120V AC, 60Hz.
Noise Level: 51 dB (normal mode).
Dimensions: 15.4" W × 11.4" D × 24.3" H.
Weight: 41.9 lbs.
Refrigerant: R410a.

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY, TIMER, FAN SPEED, FILTER RESET.

Display Indicators: Current humidity, set humidity, timer, full tank, filter alert, mode icons.

Modes: AUTO (maintains set humidity), CONTINUOUS (runs continuously), TURBO (maximum dehumidification). Fan Speed: LOW (quiet operation), HIGH (faster moisture removal). Timer: 1-24 hours for automatic on/off. Humidity Control: 35%-85% in 5% increments. Filter Reset: Press after cleaning filter to reset alert.

Connecting Drainage

Two drainage options: Manual (water tank) or Continuous (drain hose).

Manual drainage: Empty tank when FULL indicator lights.
Continuous drainage: Remove tank, attach garden hose to drain outlet, route hose to floor drain or sink.
Ensure hose is downward sloping without kinks.

Tip: For basement use, continuous drainage is recommended to prevent overflow.

Operation Modes

Supports multiple operation modes for different needs.

AUTO Mode: Automatically cycles to maintain set humidity level.
CONTINUOUS Mode: Runs continuously regardless of humidity.
TURBO Mode: Maximum fan speed for rapid dehumidification.
Timer Operation: Set unit to turn on/off at specific times.
Fan Only Mode: Circulates air without dehumidifying (available in some models).

WARNING! Do not operate below 41°F to prevent coil freezing. Turn off before moving.

Maintenance

Regular maintenance ensures optimal performance.

Clean filter every 2 weeks: Remove, wash with warm water, dry completely.
Empty water tank regularly: Clean with mild detergent monthly.
Check drain hose: Ensure no clogs in continuous drainage setup.
Clean exterior: Wipe with damp cloth; never use harsh chemicals.
Off-season storage: Empty tank, clean unit, store upright in dry place.

Care & Cleaning

Unplug before cleaning. Use only damp cloth; do not immerse in water.

CAUTION! Never use gasoline, thinner, or abrasive cleaners. Do not spray water directly on unit.

Regulatory Information

UL Listed; meets U.S. safety standards. Energy Star certified for energy efficiency. Copyright © Honeywell International Inc. For support, visit www.honeywellhome.com or contact 1-800-332-1110. This product contains refrigerant; dispose of properly according to local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	Power issue	Check outlet; ensure plug is secure; check circuit breaker.
Not removing moisture	Settings/temperature	Check humidity setting; ensure room temp above 41°F; clean filter.
Water leaking	Tank/drainage	Ensure tank properly inserted; check drain hose connection; level unit.
Loud noise	Vibration/obstruction	Place on level surface; check for objects near fan; clean filter.
Full tank light on	Tank full/float stuck	Empty tank; check float moves freely; clean tank area.
Filter light on	Dirty filter	Clean filter; press FILTER RESET button.
Ice on coils	Low temperature	Turn off; let ice melt; move to warmer area or raise room temp.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-332-1110; www.honeywellhome.com