Honeywell TP70WKN Dehumidifier Manual

The Honeywell TP70WKN is a 70-pint capacity dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drain option, washable air filter, auto-restart after power interruption, turbo mode for faster moisture removal, and a digital display with humidity readout. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operating Modes 7. Maintenance & Cleaning 8. Storage & Winterization 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, 70-pint water tank with handle and full-tank indicator, washable air filter, continuous drain hose connection, casters for mobility, and auto-defrost function.

Feature	Description
Digital Control Panel	LED display for humidity level, mode, and timer settings
70-Pint Water Tank	Removable bucket with carrying handle and full-tank alert
Continuous Drain Option	Hose connection for unattended operation
Washable Air Filter	Captures dust and particles; reusable after cleaning
Auto Humidity Control	Maintains set humidity level (30%-80% RH)
Turbo Mode	Increases fan speed for faster dehumidification
Auto-Restart	Resumes previous settings after power outage
Auto-Defrost	Prevents coil freezing in low temperatures
24-Hour Timer	Program on/off cycles for energy savings
Casters & Handles	Easy mobility between rooms

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place unit at least 12 inches from walls and furniture for proper airflow.
Level Surface: Ensure unit is level to allow water tank to seat correctly and trigger shutoff.
Continuous Drain Setup: Attach 5/8" inner diameter hose to drain port; route to floor drain or sink.
Power Connection: Plug into dedicated 115V AC, 60Hz outlet. Do not use extension cord.

WARNING! Do not place in areas below 41°F (5°C). Ensure air intake and exhaust are unobstructed.

First-Time Setup

Power on dehumidifier; configure initial settings.

Insert water tank: Ensure tank is fully seated until click is heard.
Set desired humidity: Press HUMIDITY button to select 30%-80% relative humidity.
Select mode: Choose between CONTINUOUS, AUTO, or TURBO using MODE button.
Set timer (optional): Use TIMER button to program automatic shutoff or startup.
Check filter: Verify washable filter is installed correctly behind front grille.

CAUTION! Handle water tank with care to avoid spills. Unit must remain upright during operation.

Specifications

Model: Honeywell TP70WKN
Capacity: 70 pints per day (at 80°F, 60% RH)
Operating Range: 41°F to 95°F (5°C to 35°C)
Humidity Control: 30% to 80% RH (adjustable in 5% increments)
Water Tank: 13.2-pint capacity with full-tank indicator and auto-shutoff
Air Flow: 188 CFM (Turbo mode)
Filter: Washable mesh filter
Power: 115V AC, 60Hz, 6.5A
Dimensions: 15.4" W x 11.4" D x 24.3" H
Weight: 40.8 lbs
Noise Level: 51 dB (Normal mode)

Controls and Settings

Access controls via digital panel on top of unit.

Control Panel: POWER, MODE (Continuous/Auto/Turbo), HUMIDITY (+/-), TIMER (1-24 hours), FILTER RESET indicator.

Humidity Setting: Adjust between 30%-80% RH. When set humidity is reached, compressor cycles off but fan may continue. Mode Selection: CONTINUOUS runs until manually turned off; AUTO maintains set humidity; TURBO maximizes moisture removal. Timer: Set 1-24 hour delay for automatic startup or shutdown. Filter Alert: FILTER light illuminates after 250 hours of operation; reset after cleaning.

Operating Modes

Three primary modes for different conditions.

AUTO Mode: Unit runs until set humidity is achieved, then cycles on/off to maintain level.
CONTINUOUS Mode: Operates continuously regardless of humidity; ideal for very damp conditions.
TURBO Mode: Fan runs at highest speed for maximum air circulation and faster dehumidification.
Drain Options: Use water tank (manual emptying) or connect hose to drain port for continuous drainage.

Tip: Use AUTO mode for energy efficiency. TURBO mode may increase noise level.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Water Tank: Empty and clean monthly with mild detergent; rinse thoroughly.
Air Filter: Clean every 2-4 weeks: Remove, wash with warm water, air dry completely before reinstalling.
Exterior: Wipe with soft, damp cloth. Do not use abrasive cleaners.
Coils and Grille: Vacuum dust buildup every 3 months to maintain airflow.
End-of-Season: Empty tank, clean filter, and run in FAN-only mode for 30 minutes to dry interior.

WARNING! Unplug unit before cleaning. Never immerse in water or use harsh chemicals.

Storage & Winterization

Proper storage prevents damage during off-season.

Empty and clean water tank thoroughly.
Clean air filter and ensure it's completely dry.
Run unit in FAN mode for 30 minutes to dry internal components.
Unplug power cord and wrap neatly.
Store in upright position in dry, covered area.
Cover unit to prevent dust accumulation.

CAUTION! Do not store in temperatures below 41°F (5°C) or where water may freeze inside unit.

Regulatory Information

UL Listed; meets U.S. safety standards. ETL certified. Energy Star qualified. Copyright © Honeywell International Inc. For support, visit www.honeywellhome.com or contact 1-800-474-2147. This product contains refrigerant R-410A. Dispose of according to local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	No power	Check outlet; ensure plug is fully inserted; test outlet with another device.
Red light flashing	Full water tank	Empty tank and reinsert properly until click is heard.
Low dehumidification	Dirty filter/extreme conditions	Clean air filter; ensure room temperature is between 41°F-95°F.
Water leaking	Tank not seated/hose connection	Remove and reinsert tank; check hose for kinks or improper connection.
Loud noise	Uneven surface/obstruction	Place on level floor; check for objects touching fan or grille.
FILTER light on	Dirty filter	Clean filter; press and hold FILTER button for 3 seconds to reset.
Ice on coils	Low temperature	Auto-defrost should activate; move to warmer area if below 41°F.
Continuous drain not working	Hose blockage/elevation	Ensure hose is clear and drain point is lower than drain port.

Reset: Unplug for 5 minutes, then restart. If issues persist, contact support.

Service: 1-800-474-2147; www.honeywellhome.com