Honeywell TP70WK Dehumidifier Manual

The Honeywell TP70WK is a 70-pint dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drain option, washable filter, digital display with humidity readout, auto-restart after power interruption, 24-hour timer, full tank alert with auto-shutoff, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Drainage Options 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, Water tank with handle, Washable air filter, Continuous drain hose connection, Casters for mobility, Humidity sensor.

Feature	Description
Digital Control Panel	LED display with humidity readout and touch controls
70-Pint Capacity	Removes up to 70 pints per day at 65°F/60% RH
Automatic Humidity Control	Set desired humidity level (35%-85%)
Continuous Drain Option	Garden hose connection for unattended operation
Washable Air Filter	Removable filter for easy cleaning
Auto Restart	Resumes previous settings after power outage
24-Hour Timer	Program on/off cycles
Full Tank Alert	LED indicator and auto-shutoff when tank is full
Casters & Handles	Easy mobility between rooms
Energy Efficient	Energy Star certified operation

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Remove all packaging materials and tape.
Place unit on level floor with at least 12-18 inches clearance on all sides.
Ensure proper room size: Up to 4,500 sq. ft. in moderate humidity conditions.
Keep away from heat sources, direct sunlight, and obstructions to airflow.
Install casters if not pre-attached.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure proper ventilation around unit.

First-Time Setup

Plug into grounded outlet; follow initial setup procedure.

Check filter: Ensure washable filter is properly installed.
Insert water tank: Slide tank completely into base until it clicks.
Power on: Plug into 120V outlet, press POWER button.
Set humidity: Use UP/DOWN buttons to set desired humidity (45-50% recommended).
Select mode: Choose between Continuous, Auto, or Timer mode.
For continuous drain: Connect garden hose to drain port before operation.

CAUTION! Use only grounded outlet. Do not use extension cord.

Specifications

Model: TP70WK
Capacity: 70 pints per day (at 65°F/60% RH)
Coverage Area: Up to 4,500 sq. ft.
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Humidity Range: 35% to 85% RH adjustable
Tank Capacity: 1.8 gallons (6.8 liters)
Power: 115V, 60Hz, 6.5A
Noise Level: 51 dB on low setting
Dimensions: 15.4" W × 11" D × 24.3" H
Weight: 41.9 lbs
Certifications: Energy Star, ETL listed

Controls and Settings

Digital Control Panel: POWER, MODE, TIMER, UP/DOWN buttons, FILTER indicator, FULL TANK indicator.

Display Indicators: Current humidity, Set humidity, Timer setting, Filter alert, Full tank alert, Mode indicator.

Humidity Control: Adjust between 35%-85% RH in 5% increments. Modes: Continuous (runs constantly), Auto (maintains set humidity), Timer (programmable on/off). Fan Speed: High/Low settings adjustable via MODE button. Filter Reset: Hold FILTER button for 3 seconds after cleaning. Timer: Program 1-24 hours for automatic operation.

Operation Modes

Three operating modes for different needs.

Auto Mode: Maintains set humidity level automatically. Unit cycles on/off as needed.
Continuous Mode: Runs continuously regardless of humidity. Use for maximum moisture removal.
Timer Mode: Set 1-24 hour operation. Unit turns off automatically after set time.
Fan Only: Circulates air without dehumidifying (available in some settings).

Tip: For energy savings, use Auto mode with humidity set to 45-50%.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Check water tank, empty when full.
Weekly: Check filter condition.
Monthly: Clean air filter with warm water and mild detergent.
Seasonally: Clean exterior with damp cloth; never use harsh chemicals.
Annual: Check coils for dust; clean gently with soft brush.
Storage: Empty tank, clean unit, store in dry place with cord wrapped.

WARNING! Unplug unit before any maintenance. Do not immerse in water.

Drainage Options

Two methods for water removal: Manual tank emptying or continuous drain.

Manual Drain: Unit stops when tank is full (FULL indicator lights). Remove tank, carry to drain, empty, replace.
Continuous Drain: Connect standard garden hose (not included) to drain port. Ensure hose runs downward to floor drain. Unit operates continuously without tank filling.
Gravity Drain: Place unit higher than drain location for proper flow.

CAUTION! Ensure continuous drain hose is not kinked or blocked.

Safety Features

Built-in protections for safe operation.

Feature	Function
Auto Shutoff	Stops operation when tank is full
Overheat Protection	Shuts off compressor if overheating detected
Auto Defrost	Prevents frost buildup in low temperatures
Tip-Over Protection	Shuts off if unit is knocked over
Child Lock	Prevents accidental button presses
Filter Alert	Reminds when filter needs cleaning

Regulatory Information

ETL Listed: Meets safety standards. Energy Star: Certified for energy efficiency. FCC Part 15: Class B digital device; complies with interference limits. Copyright © Honeywell International Inc. For support, visit www.honeywellhome.com or contact 1-800-332-1110. This product contains refrigerant R-410A. Proper disposal required by local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	No power	Check outlet; ensure plug is secure; check circuit breaker.
Not collecting water	Low humidity	Check room humidity; ensure temperature above 41°F.
Full tank light on	Tank full or not seated	Empty tank; ensure tank is properly inserted.
Loud noise	Uneven surface or obstruction	Place on level surface; check for objects near fan.
Filter light on	Dirty filter	Clean filter; press and hold FILTER button to reset.
Ice on coils	Low temperature	Turn off; allow ice to melt; increase room temperature.
Error code displayed	System fault	Unplug for 10 minutes; restart. If persists, contact service.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-332-1110; www.honeywellhome.com