Honeywell TP70PWKN Dehumidifier Manual

The Honeywell TP70PWKN is a 70-pint capacity dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drainage option, washable filter, digital display with humidity readout, 24-hour timer, auto-restart function, and turbo mode for faster moisture removal. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Storage & Winterization 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, Water tank with full indicator, Continuous drainage port, Washable air filter, Casters for mobility, Handle for transport.

Feature	Description
Capacity	70 pints per day (at 60°F, 60% RH)
Digital Display	Shows current humidity, timer, filter alert
Auto Humidity Control	Set desired humidity level (35%-85%)
Continuous Drainage	Garden hose connection for unattended operation
Washable Filter	Removable and reusable air filter
Turbo Mode	Maximum moisture removal speed
24-Hour Timer	Program on/off cycles
Auto-Restart	Resumes previous settings after power outage
Full Tank Alert	Auto shut-off when tank is full
Portability	Four casters and carrying handle

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Choose location: Place in center of room away from walls/furniture for optimal airflow.
Check clearance: Minimum 12 inches from walls, 18 inches from ceiling.
Set up drainage: Attach garden hose to drain port for continuous drainage (optional).
Position water tank: Ensure tank is properly seated before operation.
Plug into grounded 120V AC outlet.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation around unit.

First-Time Setup

Power on dehumidifier; configure initial settings.

Set desired humidity: Press HUMIDITY button to select target level (recommended 45-50%).
Configure timer: Press TIMER to set automatic on/off schedule.
Select mode: Choose between Continuous, Auto, or Turbo mode.
Check filter: Ensure filter is clean before first use.
Test operation: Run for 24 hours to establish baseline performance.

CAUTION! Handle water tank carefully when full (approx. 12 lbs). Empty regularly.

Specifications

Model: TP70PWKN
Capacity: 70 pints/day (at 60°F/60% RH)
Coverage Area: Up to 4,500 sq ft (depending on conditions)
Operating Temperature: 41°F to 95°F
Water Tank Capacity: 12.5 pints
Power Consumption: 700W (max)
Voltage: 120V AC, 60Hz
Noise Level: 51 dB (normal mode)
Dimensions: 15.4" W × 11" D × 24.3" H
Weight: 41.9 lbs
Refrigerant: R410A

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY, TIMER, TURBO, FILTER RESET.

Display Indicators: Current humidity, Set humidity, Timer, Filter alert, Full tank, Turbo mode.

Humidity Control: Adjust between 35%-85% in 5% increments. Timer: Program 1-24 hours for automatic start/stop. Modes: Continuous (runs constantly), Auto (maintains set humidity), Turbo (maximum dehumidification). Filter Alert: Flashing indicator when filter needs cleaning. Auto Defrost: Automatically activates when coil temperature drops below 41°F.

Operation Modes

Auto Mode: Maintains set humidity level automatically. Continuous Mode: Runs continuously regardless of humidity. Turbo Mode: Maximum fan speed for fastest moisture removal.

Select mode with MODE button.
Adjust humidity setting as needed.
Monitor water tank level; empty when full indicator lights.
Use timer for energy-saving operation.

Tip: For maximum efficiency, keep doors and windows closed during operation.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Clean filter: Remove and wash every 2 weeks (more often in dusty environments).
Empty water tank: Drain regularly; clean with mild detergent monthly.
Clean exterior: Wipe with damp cloth; never use harsh chemicals.
Check drain hose: Ensure continuous drainage hose is clear of obstructions.
Reset filter indicator: Press FILTER RESET after cleaning filter.

WARNING! Always unplug unit before cleaning. Never immerse in water.

Storage & Winterization

Proper storage prevents damage during non-use periods.

Clean thoroughly: Follow maintenance steps above.
Empty completely: Drain all water from tank and internal components.
Dry completely: Run fan-only mode for 2 hours to dry coils.
Store properly: Keep in dry, covered area with temperature above freezing.
Cover unit: Use original packaging or breathable cover.

CAUTION! Do not store with water in tank. Protect from freezing temperatures.

Regulatory Information

UL Listed: Meets safety standards for household use. Energy Star: Certified for energy efficiency. EPA Refrigerant Compliance: Uses R410A refrigerant. For support, visit www.honeywellhome.com or contact 1-800-332-1110. Copyright © 2023 Honeywell International Inc.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/full tank	Check power connection; ensure tank is empty and properly seated.
Poor dehumidification	Dirty filter/extreme temps	Clean filter; ensure room temperature is between 41°F-95°F.
Water leakage	Improper hose connection	Check drain hose for kinks; ensure proper connection to drain port.
Loud noise	Uneven surface/obstruction	Place on level surface; check for objects near fan.
Frost on coils	Low temperature	Auto defrost should activate; move to warmer area if persistent.
Filter light on	Dirty filter	Clean filter and press FILTER RESET button.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-332-1110; www.honeywellhome.com