Honeywell TP70PWK Dehumidifier Manual

The Honeywell TP70PWK is a 70-pint capacity dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drain option, washable air filter, auto-restart after power interruption, full tank alert with auto-shutoff, turbo mode for faster dehumidification, and 24-hour timer. It operates on 115V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Draining Options 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control Panel, Water Tank, Air Filter, Drain Hose Connector, Casters for mobility, Handle for transport.

Feature	Description
Humidity Control	Adjustable from 35% to 85% relative humidity
Water Tank	Removable 1.8-gallon capacity with full indicator
Continuous Drain	Hose connection for automatic draining
Air Filter	Washable mesh filter for dust and particles
Turbo Mode	Increases fan speed for faster dehumidification
Auto-Restart	Resumes previous settings after power outage
24-Hour Timer	Program on/off cycles
Full Tank Alert	LED indicator and auto-shutoff when tank is full
Mobility	Four casters and top handle for easy movement
Power Cord	6-foot length with storage wrap

Installation & Placement

Unpack and inspect contents. Place on level, stable floor.

Clear area: Ensure at least 12 inches of clearance on all sides for proper airflow.
Check level: Unit must be level for proper operation and drainage.
Install drain hose (optional): Attach 5/8" inner diameter hose to drain port for continuous draining.
Plug into grounded 115V AC outlet.

WARNING! Do not place near heat sources or in direct sunlight. Ensure room temperature is between 41°F and 95°F for optimal performance.

First-Time Setup

Power on dehumidifier; set initial preferences.

Insert water tank: Ensure tank is properly seated and empty.
Set desired humidity: Use HUMIDITY CONTROL buttons to select target level (recommended 45-50%).
Select fan speed: Choose between NORMAL and TURBO modes.
Set timer (optional): Program start/stop times using TIMER buttons.
For continuous drain: Connect hose and ensure downward slope for gravity flow.

CAUTION! Handle water tank carefully to avoid spills. Do not operate without air filter installed.

Specifications

Capacity: 70 pints per day at 80°F, 60% RH.
Coverage Area: Up to 4,500 sq. ft. (medium to large rooms).
Water Tank: 1.8 gallons (removable).
Humidity Control: 35% to 85% adjustable.
Fan Speeds: Two (Normal, Turbo).
Timer: 24-hour programmable.
Power Source: 115V AC, 60Hz, 6.5A.
Operating Conditions: 41°F to 95°F.
Noise Level: ≤ 52 dB on Normal mode.
Dimensions: 15.4" W × 11.4" D × 24.3" H.
Weight: 41.9 lbs.

Controls and Settings

Control Panel: POWER, HUMIDITY UP/DOWN, FAN SPEED (Normal/Turbo), TIMER SET, FILTER RESET indicator.

Display: Current humidity, target humidity, timer settings, filter alert, full tank indicator.

Humidity Setting: Adjust in 5% increments. Fan Speed: Normal for quiet operation, Turbo for maximum moisture removal. Timer: Set in 1-hour increments up to 24 hours. Filter Reset: Press and hold FILTER button for 3 seconds after cleaning filter. Auto-Defrost: Activates automatically in low temperatures to prevent coil freezing.

Operation Modes

Standard, Continuous, and Timer modes available.

Standard Mode: Unit runs until target humidity is reached, then cycles on/off to maintain.
Continuous Mode: Runs continuously regardless of humidity level (select "CONT" on humidity control).
Timer Mode: Set unit to turn on/off at specific times.
Turbo Mode: Increases fan speed for faster dehumidification in high humidity conditions.

Tip: Use Continuous mode for initial drying of very damp spaces, then switch to Standard mode.

Maintenance & Cleaning

Unplug unit before any maintenance.

Clean air filter: Remove monthly, wash with mild detergent, rinse, dry completely before reinstalling.
Empty water tank: When FULL indicator lights, remove tank, pour out water, replace securely.
Clean exterior: Wipe with soft, damp cloth; do not use abrasive cleaners.
Clean water tank: Periodically wash with mild soap to prevent mold/mildew.
End-of-season storage: Empty tank, run in fan-only mode for 30 minutes to dry coils, clean filter, store in dry place.

WARNING! Never immerse unit in water. Do not operate without filter.

Draining Options

Two methods: Manual (water tank) or Continuous (drain hose).

Manual Draining: Unit stops when tank is full (indicator lights). Remove tank, carry to drain, empty, replace.

Continuous Draining: Attach 5/8" ID hose to drain port. Ensure hose has downward slope without kinks. Unit will drain automatically without stopping.

CAUTION! For continuous drain, place unit near floor drain or sink. Check hose regularly for clogs.

Regulatory Information

UL Listed. FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Honeywell International Inc. For support, visit www.honeywellhome.com or contact 1-800-332-1110. This product meets ENERGY STAR® guidelines for energy efficiency when used as directed.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/full tank	Check power outlet; ensure tank is empty and properly seated; reset circuit breaker.
Reduced moisture removal	Dirty filter/extreme conditions	Clean air filter; ensure room temp is 41-95°F; check for blocked airflow.
Water leaking	Tank not seated/hose leak	Remove and reinsert tank; check hose connections; ensure unit is level.
Loud noise	Loose parts/obstruction	Ensure unit is on level surface; check for objects near fan; tighten any loose panels.
Display shows "FL"	Filter needs cleaning	Clean air filter, then press and hold FILTER button for 3 seconds to reset.
Frost on coils	Low temperature	Auto-defrost should activate; if persistent, move to warmer area or increase room temp.

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-332-1110; www.honeywellhome.com