Honeywell TP70AWKNR Dehumidifier Manual

The Honeywell TP70AWKNR is a 70-pint capacity dehumidifier designed for residential use, featuring automatic humidity control, continuous drain option, washable filter, auto-restart, full tank alert with auto-shutoff, caster wheels for mobility, and digital controls with LED display. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drain Hose 7. Operation Modes 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, 70-pint water tank, washable air filter, continuous drain port, caster wheels, humidity sensor, and auto-defrost function.

Feature	Description
Capacity	70 pints per day (at 60°F, 90% RH)
Humidity Control	Adjustable from 35% to 85% relative humidity
Water Tank	Removable 1.8-gallon bucket with handle and full indicator
Continuous Drain	Garden hose adapter for unattended operation
Air Filter	Washable mesh filter for dust and particles
Auto Restart	Resumes previous settings after power interruption
Auto Shutoff	Turns off when tank is full
Mobility	Four caster wheels for easy movement
Display	LED digital display showing humidity level and settings
Timer	24-hour on/off programmable timer

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place unit at least 12 inches from walls and furniture for proper airflow.
Install casters: Attach four wheels to bottom of unit (if not pre-installed).
Check filter: Ensure washable filter is properly seated in front grille.
Power connection: Plug into dedicated 115V AC, 60Hz outlet.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure unit is upright for at least 24 hours before first use if transported on its side.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

Set desired humidity: Press HUMIDITY SET button to select between 35%-85% RH.
Select fan speed: Choose between HIGH or LOW fan setting.
Set timer (optional): Use TIMER button to program automatic on/off cycles.
Check drain options: For continuous operation, attach hose to drain port.

CAUTION! Place on level surface to prevent water leakage. Do not block air intake or exhaust.

Specifications

Model: TP70AWKNR
Capacity: 70 pints per day (AHAM verified at 60°F/90% RH)
Coverage Area: Up to 4,500 sq. ft. (depending on conditions)
Water Tank Capacity: 1.8 gallons (6.8 liters)
Power Requirements: 115V AC, 60Hz, 6.5A
Operating Conditions: 41°F to 95°F (5°C to 35°C)
Noise Level: ≤ 51 dB on low setting
Refrigerant: R410A
Dimensions: 15.4" W × 11.4" D × 24.3" H
Weight: 41.9 lbs

Controls and Settings

Access controls via front panel buttons and LED display.

Control Panel: POWER, HUMIDITY SET (+/-), FAN SPEED (HIGH/LOW), TIMER, CONTINUOUS MODE, FILTER RESET.

Humidity Control: Adjust between 35%-85% RH in 5% increments. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Program 24-hour on/off schedule. Continuous Mode: Bypasses tank full shutoff when drain hose connected. Filter Reset: Resets filter maintenance indicator after cleaning. Display: Shows current room humidity, set point, timer status, and alerts.

Connecting Drain Hose

For continuous operation without emptying tank.

Turn off and unplug unit.
Remove drain plug from back of unit.
Attach standard garden hose (¾" diameter) to drain port.
Route hose to floor drain, sink, or outdoors (downward slope required).
Select CONTINUOUS mode on control panel.

Tip: Ensure hose has no kinks or loops that could trap water.

Operation Modes

Multiple operating modes for different needs.

Auto Mode: Maintains set humidity level automatically.
Continuous Mode: Runs continuously until turned off (requires drain hose).
Turbo Mode: HIGH fan speed for maximum moisture removal.
Quiet Mode: LOW fan speed for nighttime operation.
Timer Mode: Set to turn on/off at specific times.
Auto Defrost: Automatically defrosts coils in low temperatures.

WARNING! Do not operate below 41°F without auto-defrost feature active. Empty tank before moving unit.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean filter every 2 weeks: Remove, wash with warm water, dry completely.
Empty water tank: When FULL indicator lights, turn off, remove and empty tank.
Clean exterior: Wipe with damp cloth; do not use chemicals or abrasives.
Clean coils annually: Use soft brush to remove dust from rear coils.
End-of-season storage: Empty tank, clean filter, let dry completely, cover and store upright.

CAUTION! Always unplug before cleaning. Never immerse unit in water.

Regulatory Information

UL Listed: Meets UL 474 safety standards. Energy Star: Certified for energy efficiency. FCC Part 15: Class B digital device compliant. California Proposition 65 Warning: Contains chemicals known to cause cancer and reproductive harm. For support, visit www.honeywellhome.com or contact 1-800-332-1110. 5-year limited warranty on sealed system, 1-year on parts and labor.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	No power	Check outlet; ensure plug is secure; test outlet with another device.
Not removing moisture	Room temperature too low/high	Operate only between 41°F-95°F; check filter for blockage.
Water leaking	Tank not seated properly	Ensure tank is fully inserted; check drain hose connection.
Loud noise	Uneven surface or debris	Place on level floor; check for objects near fan.
FILTER light on	Dirty filter	Clean filter as instructed; press FILTER RESET button.
Frost on coils	Low temperature operation	Auto-defrost should activate; move to warmer area if persistent.
Display not working	Power issue	Unplug for 5 minutes, then restart; check electrical connection.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-332-1110; www.honeywellhome.com