Honeywell TP70AWKN Dehumidifier Manual

The Honeywell TP70AWKN is a 70-pint capacity dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drain option, washable filter, auto-restart after power interruption, full tank alert with auto-shutoff, turbo mode for faster dehumidification, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Dehumidifier unit with built-in humidistat, removable water tank, washable air filter, control panel, continuous drain hose connection, casters for mobility, and handle for transport.

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

1. Choose location: Place in center of room, away from walls/furniture (minimum 12 inches clearance).
2. Check airflow: Ensure air intake and exhaust vents are unobstructed.
3. Level unit: Adjust feet if necessary for proper drainage.
4. Connect power: Plug into dedicated 115V AC outlet; avoid extension cords.
5. Set up drainage: Attach hose for continuous drain or use water tank.

WARNING! Do not place in tight enclosures or near heat sources. Ensure proper ventilation.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

1. Insert filter: Ensure washable filter is properly seated in filter compartment.
2. Set humidity level: Press HUMIDITY button to set desired RH (45%-50% recommended).
3. Select mode: Choose AUTO (default) or TURBO for faster dehumidification.
4. Test operation: Allow unit to run for 15 minutes; check for condensation and airflow.
5. Configure drain: Attach hose if using continuous drain option.

CAUTION! Handle water tank carefully when full to prevent spills.

Specifications

• Model: TP70AWKN
• Capacity: 70 pints/day (at 60°F, 60% RH)
• Coverage: Up to 4,500 sq. ft. (moderately damp conditions)
• Water Tank: 1.8 gallons (removable)
• Humidity Control: 30% to 80% RH (adjustable)
• Air Flow: 188 CFM (Turbo mode)
• Filter: Washable mesh filter
• Power: 115V, 60Hz, 6.5A
• Noise Level: 51 dB (Normal mode)
• Dimensions: 15.4" W × 11.4" D × 24.3" H
• Weight: 41.9 lbs
• Operating Temp: 41°F to 95°F

Controls and Settings

Control Panel: POWER button, HUMIDITY +/- buttons, MODE selector, FILTER indicator, TANK FULL indicator.

Display: Current humidity level, set point, mode indicator, filter alert, tank full alert.

Humidity Setting: Press HUMIDITY + or - to adjust between 30%-80% RH. Mode Selection: AUTO (maintains set humidity), TURBO (maximum dehumidification), CONTINUOUS (runs continuously regardless of humidity). Timer: 1-24 hour programmable timer (press TIMER button). Filter Reset: Press and hold FILTER button for 3 seconds after cleaning.

Operation Modes

AUTO Mode: Unit cycles on/off to maintain set humidity level. TURBO Mode: Runs compressor and fan at maximum speed for rapid dehumidification. CONTINUOUS Mode: Operates continuously until manually turned off or tank is full.

1. Select mode using MODE button.
2. Monitor humidity display for current room conditions.
3. Adjust set point as needed for comfort or specific requirements.
4. Use timer for scheduled operation (e.g., overnight).

Tip: For energy efficiency, use AUTO mode with humidity set to 45%-50%.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean filter: Remove and wash filter every 2-4 weeks with warm water; dry completely before reinstalling.
2. Empty water tank: Regularly empty tank before it reaches full line.
3. Clean exterior: Wipe with damp cloth; do not use harsh chemicals.
4. Clean condenser coils: Use soft brush to remove dust every 3-6 months.
5. Check drain hose: Ensure continuous drain hose is clear of obstructions.
6. Off-season storage: Empty tank, clean unit, and store in dry location.

WARNING! Always unplug unit before cleaning or maintenance.

Drainage Options

Two drainage methods: Manual (water tank) or Continuous (hose).

Water Tank: Remove tank when full indicator lights; empty and replace. Continuous Drain: Attach 5/8" ID hose to drain port; ensure downward slope for gravity flow.

1. For continuous drain: Remove tank, attach hose to drain port, route to floor drain or sink.
2. Check for leaks during initial setup.
3. Clean hose periodically to prevent clogs.

CAUTION! Do not operate without tank or proper hose connection.

Safety Features

Auto Shutoff: Stops operation when tank is full. Overload Protection: Prevents motor damage from power surges. Anti-Frost Sensor: Protects compressor in low temperatures. Child Lock: Prevents accidental setting changes.

Regulatory Information

UL Listed: Meets safety standards for household dehumidifiers. Energy Star: Compliant with energy efficiency guidelines. EPA Refrigerant: Uses R-410a environmentally friendly refrigerant. Copyright © Honeywell International Inc. For support, visit www.honeywellhome.com or contact 1-800-332-1110.

Troubleshooting

Reset: Unplug for 5 minutes, then restart. For persistent issues, contact support.

Service: 1-800-332-1110; www.honeywellhome.com