Honeywell TP70 Dehumidifier Manual

The Honeywell TP70 is a high-capacity dehumidifier designed for residential and light commercial use, featuring a 70-pint per day removal capacity, digital humidity control, auto-defrost, continuous drain option, washable filter, full tank alert with auto-shutoff, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drain Hose 7. Operation Modes 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, 70-pint water tank, washable air filter, continuous drain port, casters for mobility, and auto-restart function.

Feature	Description
Digital Humidity Control	Set desired humidity level from 35% to 85%
70-Pint Capacity	Removes up to 70 pints of moisture per day (at 80°F, 60% RH)
Auto-Defrost	Prevents coil freezing in low temperatures
Continuous Drain Option	Garden hose connection for unattended operation
Washable Air Filter	Captures dust and particles; reusable
Full Tank Alert & Auto-Shutoff	Alerts when tank is full and stops operation
Energy Efficient	Energy Star certified for lower power consumption
24-Hour Timer	Program on/off cycles
Turbo Mode	Maximum moisture removal for high humidity
Water Level Indicator	Visual gauge shows tank fill level

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place unit at least 12 inches from walls and furniture for proper airflow.
Check filter: Ensure washable filter is properly installed.
Power connection: Plug into grounded 120V AC outlet.
Drain setup: Attach garden hose to continuous drain port if using continuous drainage.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure proper ventilation around unit.

First-Time Setup

Power on dehumidifier; follow control panel prompts.

Set humidity level: Press HUMIDITY button, use arrows to set desired RH (recommended 45-50%).
Select mode: Choose NORMAL, TURBO, or DRY (for laundry) mode.
Set timer (optional): Press TIMER to program automatic on/off cycles.
Check tank: Ensure empty water tank is properly seated.

CAUTION! Do not place near heat sources or in direct sunlight. Keep children away from unit.

Specifications

Model: Honeywell TP70
Moisture Removal: 70 pints per day (at 80°F, 60% RH)
Coverage Area: Up to 4,500 sq. ft.
Tank Capacity: 16.9 pints (2 gallons)
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Power Source: 120V AC, 60Hz, 7.5A
Energy Consumption: 745 Watts (max)
Noise Level: 51 dB (normal mode)
Dimensions: 15.4" W × 11.4" D × 24.3" H
Weight: 41.9 lbs
Refrigerant: R410A

Controls and Settings

Access all functions via digital control panel. Front Panel: POWER, MODE, HUMIDITY, TIMER, TURBO, FILTER RESET.

Display Indicators: Current humidity, set humidity, full tank alert, filter clean reminder, timer status, mode indicator.

Humidity Control: Set between 35% and 85% RH. Modes: NORMAL (standard operation), TURBO (maximum dehumidification), DRY (laundry drying). Timer: Program 1-24 hours for automatic start/stop. Filter Alert: Illuminates when filter needs cleaning (every 250 hours).

Connecting Drain Hose

For continuous operation without emptying tank.

Turn off and unplug unit.
Remove drain cap from back of unit.
Attach standard 5/8" garden hose (not included).
Route hose to floor drain or suitable drainage area.
Ensure hose has downward slope without kinks.

Tip: Use hose clamp to secure connection and prevent leaks.

Operation Modes

Three operating modes for different needs.

Normal Mode: Standard dehumidification for general use.
Turbo Mode: Maximum moisture removal for very damp conditions.
Dry Mode: Concentrated drying for laundry rooms or wet clothing.
Auto-Defrost: Automatically activates when coil temperature drops below 41°F.
Auto-Restart: Resumes previous settings after power interruption.

WARNING! Do not operate in enclosed spaces without ventilation. Allow air circulation around unit.

Maintenance

Regular maintenance ensures optimal performance.

Empty water tank: When full tank indicator lights, turn off unit and empty tank.
Clean filter: Remove and wash filter every 250 hours or when filter light illuminates.
Clean exterior: Wipe with damp cloth; do not use chemicals or abrasives.
End-of-season storage: Empty tank, clean filter, coil, and housing. Store upright in dry location.

CAUTION! Always unplug before cleaning. Do not immerse unit in water.

Regulatory Information

UL Listed; meets U.S. safety standards. Energy Star certified. FCC Part 15: Class B digital device; complies with interference limits. Copyright © Honeywell International Inc. For support, visit www.honeywellhome.com or contact 1-800-332-1110. 5-year limited warranty on sealed system; 1-year limited warranty on parts.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/full tank	Check power connection; ensure tank is empty and properly seated.
Low moisture removal	Dirty filter/low temperature	Clean filter; ensure room temperature above 41°F.
Water leaking	Improper hose connection	Check drain hose for kinks; ensure proper attachment.
Loud noise	Loose parts/obstruction	Check for loose panels; ensure nothing is touching fan.
Filter light on	Dirty filter	Clean filter; press and hold FILTER button for 3 seconds to reset.
Ice on coils	Low temperature	Auto-defrost should activate; move to warmer area if persistent.

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-332-1110; www.honeywellhome.com