Honeywell TP50WKNR Dehumidifier Manual

The Honeywell TP50WKNR is a 50-pint dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drainage option, washable filter, auto-restart, full-bucket alert, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Dehumidifier unit, Water bucket, Washable air filter, Power cord, Drain hose adapter, User manual.

Installation

Unpack and inspect contents. Place on level surface.

1. Position unit: Allow at least 12 inches clearance on all sides.
2. Install filter: Ensure washable filter is properly seated.
3. Check bucket: Ensure water bucket is correctly inserted.
4. Plug into grounded outlet: Use 120V AC, 60Hz power source.

WARNING! Do not use extension cords. Ensure proper ventilation around unit.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

1. Set humidity level: Press HUMIDITY button to select desired level (45% recommended).
2. Choose mode: Select CONTINUOUS or AUTO mode based on needs.
3. Set timer: Program 24-hour timer if needed.
4. Check drainage: Decide between bucket or continuous drainage.

CAUTION! Place on level surface to prevent tipping. Keep away from heat sources.

Specifications

• Capacity: 50 pints per day (at 60°F, 60% RH).
• Coverage Area: Up to 3000 sq. ft.
• Water Bucket Capacity: 1.8 gallons.
• Power Consumption: 500W (typical).
• Voltage: 120V AC, 60Hz.
• Noise Level: 50 dB (normal mode).
• Operating Temperature: 41°F to 95°F.
• Dimensions: 15.4" x 11" x 23.6".
• Weight: 40.8 lbs.
• Refrigerant: R410a.

Controls and Settings

Access controls via front panel buttons and digital display.

Control Panel: POWER, HUMIDITY (+/-), MODE, TIMER, TURBO, FILTER RESET.

Humidity Control: Set between 30%-80% in 5% increments. Modes: CONTINUOUS (runs constantly), AUTO (maintains set humidity). Timer: Program on/off cycles up to 24 hours. Turbo Mode: Maximum dehumidification speed. Filter Reset: Resets filter maintenance indicator after cleaning.

Connecting Drainage

Option for continuous drainage using hose.

1. Turn off and unplug unit.
2. Remove water bucket.
3. Attach drain hose to adapter (not included).
4. Connect hose to floor drain or sink.
5. Replace bucket compartment cover.

Tip: Ensure hose has downward slope for proper drainage.

Operating Modes

Multiple operation modes available.

1. Auto Mode: Maintains set humidity level automatically.
2. Continuous Mode: Runs continuously until turned off.
3. Turbo Mode: Maximum moisture removal.
4. Timer Mode: Set specific operating hours.
5. Laundry Mode: Higher humidity setting for drying clothes.

WARNING! Do not operate below 41°F to prevent coil freezing.

Maintenance

Regular maintenance ensures optimal performance.

1. Clean filter every 2 weeks: Remove, wash with warm water, dry completely.
2. Empty water bucket: When full indicator lights or bucket is full.
3. Clean exterior: Use soft, damp cloth.
4. Check drain hose: Ensure no clogs if using continuous drainage.
5. Off-season storage: Empty unit, clean thoroughly, store upright.

Care & Cleaning

Unplug before cleaning. Use mild detergent if needed.

CAUTION! Do not immerse in water. Never use harsh chemicals or abrasives.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Energy Star certified. UL listed. Copyright © Honeywell International Inc. For support, visit www.honeywellhome.com or contact 1-800-474-2147.

Troubleshooting

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-474-2147; www.honeywellhome.com