Honeywell TP50AWKNR Dehumidifier Manual

The Honeywell TP50AWKNR is a 50-pint capacity dehumidifier designed for medium to large rooms, featuring an Energy Star rating, digital humidistat, continuous drain option, auto defrost, washable filter, full tank alert with auto shut-off, and caster wheels for mobility. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operating Modes 7. Maintenance & Cleaning 8. Storage & Winterization 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, 50-pint water tank, washable air filter, continuous drain hose connection, caster wheels, humidistat, and auto defrost function.

Feature	Description
Capacity	Removes up to 50 pints of moisture per day (at 80°F, 60% RH)
Digital Humidistat	Allows precise humidity level setting (30% - 80%)
Continuous Drain Option	Hose connection for unattended operation
Auto Defrost	Prevents coil freezing in low temperatures
Washable Filter	Captures airborne particles; reusable
Full Tank Alert & Auto Shut-off	Indicator light and automatic power-off when tank is full
Caster Wheels	Four wheels for easy mobility
Energy Star Rated	Energy efficient operation
Timer Function	Programmable 2/4/8 hour timer
Turbo Mode	High-speed dehumidification

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place unit at least 6-12 inches from walls and furniture for proper airflow.
Room Size: Suitable for areas up to 3000 sq. ft. (medium to large rooms, basements).
Temperature Range: Operate between 41°F (5°C) and 90°F (32°C).
Drain Setup: For continuous drainage, attach hose to drain outlet and route to floor drain or sink.

WARNING! Do not place in tight enclosures or block air vents. Ensure power cord is not pinched or damaged.

First-Time Setup

Plug into dedicated 115V AC outlet; follow initial setup steps.

Install filter: Ensure washable filter is properly seated in front grille.
Set humidity level: Press HUMIDITY button to set desired level (45-50% recommended).
Select mode: Choose between Continuous, Auto, or Turbo mode based on needs.
Check drain hose: If using continuous drain, ensure hose is securely attached and unobstructed.

CAUTION! Handle water tank with care; empty before moving unit.

Specifications

Model: TP50AWKNR
Dehumidification Capacity: 50 pints/day (at 80°F, 60% RH)
Coverage Area: Up to 3000 sq. ft.
Water Tank Capacity: 1.6 gallons (removable)
Operating Temperature: 41°F to 90°F (5°C to 32°C)
Humidity Control: Digital humidistat (30% - 80% RH)
Power Requirements: 115V, 60Hz, 4.5A
Noise Level: ≤ 51 dB
Dimensions: 15.4" W x 11" D x 24.3" H
Weight: 40.8 lbs
Refrigerant: R410A

Controls and Settings

Access controls via digital panel on top of unit. Front Panel: POWER, MODE, HUMIDITY, TIMER, TURBO, FILTER RESET.

Control Functions: POWER turns unit on/off. MODE cycles through Continuous, Auto. HUMIDITY adjusts set point. TIMER sets 2/4/8 hour delay. TURBO activates high-speed drying. FILTER RESET resets filter maintenance indicator.

Settings: Humidity level (30-80%), Mode (Continuous runs until tank full; Auto maintains set humidity), Timer (delayed start/stop), Turbo (increases fan speed), Filter Alert (lights when cleaning needed).

Operating Modes

Auto Mode: Unit runs until set humidity is reached, then cycles on/off to maintain. Continuous Mode: Runs constantly until tank is full or power is off. Turbo Mode: Maximum moisture removal for rapid drying.

Select mode with MODE button.
Set desired humidity with HUMIDITY buttons.
For temporary boost, press TURBO.
Use TIMER to schedule operation.

Tip: In damp conditions, start with Turbo mode, then switch to Auto.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Empty water tank: When full, unit will shut off. Remove tank, pour out water, replace securely.
Clean filter: Remove washable filter every 2 weeks; rinse with lukewarm water; air dry completely before reinstalling.
Clean exterior: Wipe with soft, damp cloth; do not use harsh chemicals.
Check drain hose: If used, ensure it is clear of debris and kinks.
Coil cleaning: Gently vacuum condenser coil annually (when unplugged).

WARNING! Always unplug unit before cleaning. Do not immerse in water.

Storage & Winterization

If not using for extended period (e.g., winter), prepare unit for storage.

Unplug power cord.
Empty and dry water tank completely.
Clean filter and let dry.
Run unit in Fan Only mode for 30 minutes to dry internal components.
Coil drain hose if attached.
Store in cool, dry place, protected from dust.

CAUTION! Do not store with water in tank or lines to prevent mold/mildew.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © Honeywell International Inc. For support, visit www.honeywellhome.com or contact 1-800-474-2147. Energy Star is a registered trademark of the U.S. EPA.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	No power	Check outlet; ensure plug is secure; test outlet with another device.
Not removing moisture	Room temp too low/high, filter dirty	Ensure room temp is between 41°F-90°F; clean filter; check humidity setting.
Water leaking	Tank not seated, drain hose issue	Ensure tank is properly inserted; check hose for leaks/kinks.
Loud or unusual noise	Loose parts, fan obstruction	Ensure unit is level; check for objects near fan; contact service if persistent.
Filter light on	Filter needs cleaning	Clean filter as instructed; press and hold FILTER RESET for 3 seconds.
Frost on coils	Low temperature operation	Auto defrost should activate; move to warmer area if below 41°F.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-474-2147; www.honeywellhome.com