Honeywell TP50 Dehumidifier Manual

The Honeywell TP50 is a 50-pint energy-efficient dehumidifier designed for medium to large rooms up to 3000 sq ft. It features automatic humidity control, a continuous drain option, a full tank alert with auto-shutoff, a washable air filter, a 24-hour timer, and turbo mode for faster moisture removal. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operating Modes 7. Maintenance & Cleaning 8. Drainage Options 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, Water tank with handle, Air filter, Continuous drain hose connection, Casters for mobility, Power cord.

Feature	Description
Humidity Control	Automatic humidity sensing and adjustment (30%-80% RH)
Water Tank Capacity	1.8-gallon removable tank with full indicator
Continuous Drain	Hose connection for unattended operation
Turbo Mode	High-speed dehumidification for maximum moisture removal
24-Hour Timer	Programmable on/off scheduling
Auto Shutoff	Automatic power-off when tank is full
Washable Filter	Removable air filter for improved air quality
Digital Display	Shows current humidity, settings, and alerts
Energy Efficiency	Energy Star certified for lower power consumption
Mobility	Four casters for easy room-to-room movement

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place at least 12 inches from walls and furniture for proper airflow.
Environment: Operate in temperatures between 41°F and 95°F for optimal performance.
Power connection: Plug directly into grounded 120V outlet; avoid extension cords.
Drain setup: For continuous drainage, attach hose to drain port and route to floor drain.

WARNING! Do not place in tight enclosures or near heat sources. Ensure proper ventilation.

First-Time Setup

Power on dehumidifier; configure initial settings.

Insert filter: Ensure washable air filter is properly seated in front grille.
Set humidity level: Press HUMIDITY button to select desired level (45-50% recommended).
Choose mode: Select AUTO for automatic operation or TURBO for faster drying.
Timer setup: Press TIMER to program automatic start/stop times if needed.
Tank check: Verify empty water tank is properly inserted and locked in place.

CAUTION! Handle water tank carefully when full to prevent spills.

Specifications

Model: Honeywell TP50
Capacity: 50 pints per day (at 60°F, 60% RH)
Coverage: Up to 3000 square feet
Tank Capacity: 1.8 gallons
Operating Temperature: 41°F to 95°F
Humidity Range: 30% to 80% relative humidity
Power: 115V, 60Hz, 4.5A
Energy Rating: Energy Star certified
Noise Level: 51 dB on standard mode
Dimensions: 15.4" W x 11" D x 24.3" H
Weight: 40.8 lbs

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY, TIMER, TURBO, FILTER RESET.

Display Indicators: Current humidity, Set humidity, Timer status, Full tank alert, Filter alert, Turbo mode.

Humidity Control: Adjust between 30%-80% RH in 5% increments. Modes: AUTO (maintains set humidity), CONTINUOUS (runs constantly), TURBO (maximum dehumidification). Timer: Program up to 24 hours for automatic start/stop. Filter Alert: Illuminates when filter needs cleaning (reset after cleaning).

Operating Modes

Auto Mode: Automatically cycles to maintain set humidity level. Continuous Mode: Runs constantly regardless of humidity. Turbo Mode: Maximum fan speed for fastest moisture removal.

Press POWER to turn unit on.
Press MODE to cycle through AUTO, CONTINUOUS, and TURBO.
Press HUMIDITY to set desired humidity level (display shows set point).
Press TIMER to program automatic operation schedule.
Monitor display for current humidity reading and alerts.

Tip: Use AUTO mode for energy-efficient operation in living spaces.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Filter cleaning: Remove and wash filter every 2-4 weeks with warm water; dry completely before reinstalling.
Tank cleaning: Empty and clean water tank monthly with mild detergent; rinse thoroughly.
Exterior cleaning: Wipe casing with soft, damp cloth; never use harsh chemicals.
Coil inspection: Check evaporator coils annually for dust buildup; clean with soft brush if needed.
Storage: Empty tank completely, clean unit, and store in dry place if not using for extended period.

WARNING! Always unplug unit before cleaning. Never immerse in water.

Drainage Options

Two drainage methods: Manual (tank) or Continuous (hose).

Manual Drainage: Unit stops when tank is full (indicator lights). Remove tank by lifting handle, empty, and replace. Continuous Drainage: Attach 5/8" ID hose to drain port (included). Route hose to floor drain or sink. Ensure downward slope for proper drainage.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Energy Star: Meets EPA energy efficiency guidelines. Warranty: 1-year limited warranty from date of purchase. For support, visit www.honeywellhome.com or contact 1-800-332-1110. Safety Certifications: UL listed, ETL certified.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	Power issue	Check power outlet; ensure plug is fully inserted; test outlet with another device.
Not removing moisture	Room temperature, filter	Ensure room temp is between 41-95°F; clean air filter; check humidity setting.
Water leaking	Tank placement, drain hose	Ensure tank is properly seated; check drain hose connection for continuous drainage.
Loud noise	Uneven surface, loose parts	Place on level floor; check for loose panels or foreign objects in fan area.
Filter light on	Dirty filter	Clean air filter; press and hold FILTER RESET for 3 seconds.
Ice on coils	Low temperature	Turn unit off and let ice melt; move to warmer area or wait for room to warm.
Display not working	Power interruption	Unplug for 10 minutes, then restart; check for blown fuse in electrical panel.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-332-1110; www.honeywellhome.com