Honeywell TP30WKNR Dehumidifier Manual

The Honeywell TP30WKNR is a 30-pint energy-efficient dehumidifier designed for medium-sized rooms up to 1500 sq. ft. It features an automatic humidistat with digital readout, continuous drain option, auto-restart after power interruption, washable air filter, full bucket alert with auto-shutoff, turbo mode for faster moisture removal, and 24-hour timer. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Storage & Winterization 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, Water collection bucket, Washable air filter, Continuous drain hose outlet, Casters for mobility, Carrying handle.

Feature	Description
Digital Humidistat	Set and maintain desired humidity level (35%-85%)
30-Pint Capacity	Removes up to 30 pints per day at 80°F/60% RH
Continuous Drain Option	Connect hose for unattended operation
Auto Shutoff	Stops operation when bucket is full
Washable Air Filter	Captures airborne particles; improves air quality
Turbo Mode	Maximum moisture removal speed
24-Hour Timer	Program start/stop times
Auto Restart	Resumes previous settings after power outage
Full Bucket Alert	Indicator light and audible alert when full
Energy Star Certified	Energy efficient operation

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Choose location: Place in center of room or area with high humidity, away from walls/furniture (minimum 12-18 inches clearance).
Check airflow: Ensure air intake and outlet grilles are unobstructed.
Level unit: Adjust feet if necessary to prevent vibration.
Connect to power: Plug into dedicated 115V AC outlet; avoid extension cords.
Drain setup: Choose between bucket collection or continuous drain hose connection.

WARNING! Do not place in temperatures below 41°F (5°C). Ensure proper ventilation around unit.

First-Time Setup

Power on dehumidifier; configure initial settings.

Insert bucket: Ensure water collection bucket is properly seated.
Set humidity: Press HUMIDITY button to set desired level (recommended 45-50%).
Select mode: Choose between Normal, Turbo, or Timer mode.
Test operation: Allow unit to run for 15-20 minutes; check for condensation and bucket filling.
Configure drain: If using continuous drain, attach hose and ensure proper downward slope.

CAUTION! Handle bucket with care to avoid spills. Unit may produce initial plastic odor during first use.

Specifications

Model: TP30WKNR
Capacity: 30 pints per day (at 80°F/60% RH)
Coverage Area: Up to 1500 square feet
Humidity Control: Digital humidistat (35%-85% RH)
Water Removal: 1.8 liters/hour at standard conditions
Bucket Capacity: 1.8 gallons (6.8 liters)
Power Requirements: 115V AC, 60Hz, 3.5A
Noise Level: 51 dB on normal mode
Dimensions: 15.4" W × 9.8" D × 19.9" H
Weight: 30.9 lbs
Refrigerant: R410A

Controls and Settings

Control Panel: POWER button, HUMIDITY +/- buttons, MODE selector, TIMER button, FILTER indicator, FULL BUCKET indicator.

Display: Current humidity, Set humidity, Timer settings, Mode indicators, Alert icons.

Humidity Setting: Adjust between 35% and 85% in 5% increments. Modes: Normal (standard operation), Turbo (maximum dehumidification), Timer (programmed operation). Timer: Set 1-24 hours for automatic start/stop. Filter Alert: Illuminates when air filter needs cleaning. Bucket Alert: Flashing light and beep when bucket is full or not properly seated.

Operation Modes

Normal Mode: Standard dehumidification with energy-efficient operation. Turbo Mode: Runs compressor and fan at maximum speed for fastest moisture removal. Timer Mode: Program unit to turn on/off at specific times.

Select mode: Press MODE button to cycle through options.
Set parameters: Use +/- buttons to adjust humidity level or timer duration.
Monitor operation: Display shows current room humidity and set point.
Bucket maintenance: Empty when full or use continuous drain for unattended operation.

Tip: For optimal efficiency, keep doors and windows closed during operation.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Check and empty water bucket as needed.
Weekly: Clean air filter with warm water and mild detergent; dry completely before reinstalling.
Monthly: Clean exterior with soft, damp cloth; never use harsh chemicals.
Seasonally: Inspect drain hose for clogs if using continuous drain.
Annually: Professional inspection recommended for compressor and coils.

WARNING! Always unplug unit before cleaning. Do not immerse in water or use abrasive cleaners.

Storage & Winterization

Proper storage prevents damage during non-use periods.

Clean thoroughly: Follow maintenance steps above.
Empty completely: Remove all water from bucket and internal reservoirs.
Dry components: Allow 24 hours for complete drying.
Store properly: Keep in upright position in dry, temperature-controlled area.
Cover unit: Use original packaging or breathable cover to prevent dust accumulation.

CAUTION! Do not store in temperatures below 41°F (5°C) or above 104°F (40°C).

Regulatory Information

UL Listed: Meets UL 474 safety standards. Energy Star: Certified for energy efficiency. FCC Part 15: Class B digital device; complies with interference limits. California Proposition 65 Warning: This product contains chemicals known to cause cancer and reproductive harm. For support, visit www.honeywellhome.com or contact 1-800-332-1110.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/bucket full	Check power connection; ensure bucket is properly seated and empty.
Poor dehumidification	Room temperature/filter	Ensure room temp is 65°F-90°F; clean air filter; check for obstructions.
Water leakage	Bucket/drain hose	Ensure bucket is properly seated; check drain hose connection and slope.
Loud noise/vibration	Placement/leveling	Ensure unit is level; check for loose parts; move away from walls.
Display not working	Power/reset	Unplug for 5 minutes then restart; check power source.
Ice on coils	Low temperature	Turn off and allow to thaw; move to warmer location (above 65°F).

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-332-1110; www.honeywellhome.com