Honeywell TP30WKN Dehumidifier Manual

The Honeywell TP30WKN is a 30-pint portable dehumidifier designed for medium-sized rooms up to 1500 sq. ft. It features an adjustable humidistat, continuous drain option, auto defrost, washable filter, full tank alert with auto shut-off, casters for mobility, and low energy consumption. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Draining Options 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with water tank, Control Panel, Casters, Air Filter, Drain Hose Outlet, Power Cord.

Feature	Description
Water Tank	Removable 1.8-gallon capacity with handle and full indicator
Adjustable Humidistat	Set desired humidity level from 35% to 85%
Continuous Drain Option	Gravity drain outlet for hose connection (hose not included)
Auto Defrost	Protects compressor in low-temperature conditions
Washable Air Filter	Captures dust and particles; reusable
Full Tank Alert & Auto Shut-off	Light indicator and automatic power-off when tank is full
Control Panel	Power button, Humidistat dial, Indicator lights
Casters	Four wheels for easy portability
Power Cord	6-foot cord with storage wrap
Carry Handle	Integrated handle for lifting and moving

Installation & Placement

Unpack and inspect contents. Place on a flat, stable surface.

Positioning: Place unit on a level floor, at least 12 inches away from walls and furniture for proper airflow.
Room Size: Use in enclosed spaces up to 1500 sq. ft. for optimal performance.
Environment: Operate in temperatures between 41°F (5°C) and 90°F (32°C).
Power: Plug into a grounded 120V AC outlet. Do not use extension cords.

WARNING! Do not place on soft surfaces like carpets that may block air intake. Ensure the unit is upright before operation.

First-Time Setup

Before first use, prepare the dehumidifier.

Remove all packaging materials and tape.
Check that the water tank is correctly seated and empty.
Install the air filter (if detached) by sliding it into the rear grille.
Plug the power cord directly into a wall outlet.
Turn the humidistat knob to the desired setting (start at 50%).
Press the POWER button to begin operation.

CAUTION! Allow the unit to stand upright for at least 2 hours after moving if it was tilted, to stabilize refrigerant.

Specifications

Model: TP30WKN
Dehumidification Capacity: 30 pints per day (at 80°F, 60% RH)
Recommended Room Size: Up to 1500 sq. ft.
Water Tank Capacity: 1.8 gallons (removable)
Humidity Control: Adjustable humidistat (35%-85%)
Air Flow: 165 CFM
Power Consumption: 300W (approx.)
Voltage: 120V AC, 60Hz
Operating Temperature: 41°F to 90°F (5°C to 32°C)
Noise Level: ≤ 51 dB
Dimensions (HxWxD): 15.4" x 11.4" x 19.9"
Weight: 30.9 lbs

Controls and Settings

Control Panel located on top of unit.

Power Button: Press to turn unit ON/OFF. Humidistat Knob: Rotate to set target humidity level. Clockwise increases dryness (lower RH%).

Indicator Lights:
Power (Green): Illuminates when unit is ON.
Full Tank (Red): Illuminates when water tank is full and needs emptying.
Defrost (Yellow): Illuminates during auto defrost cycle (compressor pauses).

Auto Restart: After a power outage, unit will resume operation at previous settings automatically.

Operation Modes

Standard operation with adjustable humidity control.

Normal Mode: Set humidistat to desired level. Unit runs until humidity is reduced, then cycles on/off to maintain setting.
Continuous Mode: Turn humidistat to maximum (clockwise) for continuous dehumidification regardless of room humidity.
Auto Defrost: Activates automatically when coil temperature drops below 41°F (5°C). Compressor pauses; fan may continue.

Tip: For fastest drying, close windows and doors. For energy savings, set humidistat to 50-55%.

Maintenance & Cleaning

Regular maintenance ensures efficiency and longevity.

Emptying Water Tank: When FULL light comes on, unplug unit, pull tank out by handle, empty, and reinsert firmly.
Cleaning Air Filter: Every 2-4 weeks, remove filter, rinse with lukewarm water, let dry completely, and reinstall.
Cleaning Exterior: Wipe cabinet with a soft, damp cloth. Do not use harsh chemicals.
Cleaning Water Tank: Periodically clean with mild detergent and water to prevent mold/mildew.

WARNING! Always unplug the unit before any maintenance. Do not immerse unit in water.

Draining Options

Two methods for water removal.

Manual Drain (Tank): Use the removable tank for smaller spaces. Empty when full.
Continuous Drain (Gravity): For unattended operation. Remove tank, attach a standard 5/8" ID garden hose (not included) to the drain outlet at back. Route hose to a floor drain or sink. Ensure hose path is downhill without kinks.

CAUTION! In continuous drain mode, the Full Tank alert and auto shut-off are disabled. Ensure drain path is clear.

Care & Storage

When not in use for extended periods, prepare for storage.

Unplug the unit.
Empty and clean the water tank. Let it dry.
Clean the air filter and let it dry.
Wrap the power cord around the cord hooks.
Store in a cool, dry place, preferably in its original box.

CAUTION! Do not store unit on its side. Store upright to protect internal components.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © Honeywell International Inc. Honeywell and the Honeywell logo are registered trademarks. For support, visit www.honeywellhome.com or contact customer service at 1-800-332-1110.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not start	No power / Full tank	Ensure plug is secure; outlet has power. Empty water tank and reinsert properly.
Little or no water collection	Low humidity / Cold room / Filter clogged	Check room humidity. Ensure room temp is above 41°F. Clean air filter.
Unit runs but stops quickly	Humidistat set too high	Turn humidistat to a lower (drier) setting.
Loud or unusual noise	Unit not level / Loose parts / Fan obstruction	Place on level floor. Check for loose panels. Ensure air intake is clear.
Water leakage	Tank not seated / Hose connection loose	Remove and reinsert tank firmly. Check continuous drain hose for secure connection.
Defrost light is on	Low ambient temperature	Normal operation in cold rooms. Unit will resume automatically.

Reset: Unplug unit for 5 minutes, then plug back in to reset electronic controls.

Service: For repairs, contact authorized service center. Do not disassemble unit yourself.

Support: 1-800-332-1110; www.honeywellhome.com