Honeywell TP30AWKNR Dehumidifier Manual

The Honeywell TP30AWKNR is a 30-pint capacity dehumidifier designed for medium-sized rooms up to 1500 sq. ft. It features automatic humidity control, continuous drain option, washable filter, auto-restart, turbo mode, and a digital display with humidity readout. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Drainage Options 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, washable air filter, removable water tank with handle and full-tank indicator, continuous drain hose connection, casters for mobility.

Feature	Description
Capacity	30 pints per day (at 80°F, 60% RH)
Coverage Area	Up to 1500 sq. ft.
Humidity Control	Auto humidity control (35%-85% RH)
Digital Display	Current humidity level and settings
Water Tank	Removable 1.8-gallon tank with full indicator
Continuous Drain	Hose connection for continuous operation
Washable Filter	Captures airborne particles
Turbo Mode	Maximum moisture removal
Auto Restart	Resumes previous settings after power outage
Timer	24-hour on/off timer

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place at least 6 inches from walls for proper airflow.
Room Size: Ensure room size matches coverage area (up to 1500 sq. ft.).
Temperature Range: Operate between 41°F and 95°F for optimal performance.
Power Connection: Plug into grounded 120V AC outlet.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation around unit.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

Install filter: Ensure washable filter is properly seated.
Set humidity level: Press HUMIDITY button to set desired level (45-50% recommended).
Select mode: Choose AUTO for automatic operation or TURBO for maximum dehumidification.
Check drainage: Install water tank or connect drain hose for continuous operation.

CAUTION! Handle water tank carefully to avoid spills. Ensure unit is level.

Specifications

Model: TP30AWKNR
Capacity: 30 pints/day (80°F, 60% RH)
Coverage: Up to 1500 sq. ft.
Water Tank: 1.8 gallons (removable)
Humidity Control: 35% to 85% RH (adjustable)
Air Flow: 165 CFM
Power: 115V, 60Hz, 4.0A
Noise Level: 51 dB
Dimensions: 15.4" W x 11.0" D x 19.9" H
Weight: 30.9 lbs

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY, TIMER, TURBO, FILTER RESET.

Display Indicators: Current humidity, set humidity, full tank, filter clean, turbo mode, timer.

Humidity Setting: Press HUMIDITY to set target humidity (35%-85%). Mode Selection: AUTO (maintains set humidity), CONTINUOUS (runs continuously), TURBO (maximum dehumidification). Timer: 24-hour programmable on/off timer. Filter Reset: Press after cleaning filter to reset indicator.

Operation Modes

AUTO Mode: Automatically cycles to maintain set humidity level. CONTINUOUS Mode: Runs continuously regardless of humidity. TURBO Mode: Maximum fan speed for fastest dehumidification.

Select mode with MODE button.
Adjust humidity level as needed.
Monitor water tank; empty when full indicator lights.
Use timer for scheduled operation.

Tip: For best energy efficiency, use AUTO mode with humidity set to 45-50%.

Maintenance & Cleaning

Unplug before maintenance. Clean every 2 weeks during heavy use.

Water Tank: Empty and clean with mild detergent; rinse thoroughly.
Air Filter: Remove and wash with warm, soapy water every 2 weeks.
Exterior: Wipe with soft, damp cloth; do not use harsh chemicals.
Coils: Vacuum condenser coils every 3 months.
Storage: Empty tank, clean unit, and store in dry place if not used for extended period.

WARNING! Do not immerse unit in water. Ensure filter is completely dry before reinstalling.

Drainage Options

Manual Drainage: Use removable water tank; empty when full indicator lights. Continuous Drainage: Connect 5/8" ID hose to drain port for unattended operation.

For continuous drain: Remove tank, attach hose to drain port.
Route hose to floor drain or suitable drainage area.
Ensure hose has downward slope without kinks.
Unit will operate continuously without tank in place.

CAUTION! Ensure proper drainage to prevent water damage. Check hose regularly for clogs.

Regulatory Information

UL Listed: Meets safety standards for household use. Energy Star: Meets energy efficiency guidelines. Copyright © Honeywell International Inc. For support, visit www.honeywellhome.com or contact 1-800-474-2147.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	Power issue/full tank	Check power connection; empty water tank; reset circuit breaker.
Poor dehumidification	Room too cold/filter dirty	Ensure room temperature above 41°F; clean air filter.
Water leaking	Tank not seated/hose issue	Ensure tank properly installed; check drain hose connections.
Loud noise	Uneven surface/fan issue	Place on level surface; check for obstructions in fan.
Display not working	Power issue	Check power source; unplug for 10 minutes then restart.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-474-2147; www.honeywellhome.com