The Honeywell TP-COMPACT-WK is a compact, energy-efficient dehumidifier designed for small to medium-sized rooms. It features adjustable humidity control, a continuous drain option, an auto-defrost function for cooler environments, a full-tank alert with auto-shutoff, washable air filter, and quiet operation. Ideal for basements, bathrooms, and other damp areas. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.
Key components: Compact housing with control panel, Water tank, Air intake grille with washable filter, Continuous drain hose port, Handle, Power cord.
| Feature | Description |
|---|---|
| Humidity Control | Adjustable digital humidistat with 35%-85% RH range |
| Water Tank | Removable, transparent tank with full-tank indicator and auto-shutoff |
| Continuous Drain | Hose port for permanent drainage (hose not included) |
| Auto Defrost | Automatically defrosts coils in low-temperature conditions |
| Air Filter | Washable pre-filter for dust and particles |
| Control Panel | Digital display, power button, mode selector, humidity up/down buttons |
| Quiet Operation | Low-noise compressor and fan design |
| Timer Function | Programmable 1-24 hour on/off timer |
| Carry Handle | Integrated handle for easy portability |
| Power Indicator | LED shows unit is powered on |
Unpack and inspect contents. Choose appropriate location.
WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation.
Power on dehumidifier; configure initial settings.
CAUTION! Handle with care; do not tilt or invert unit with water in tank.
Access controls via front panel buttons and digital display.
Control Panel: POWER button, MODE selector, HUMIDITY UP/DOWN, TIMER SET, FILTER RESET indicator.
Display Icons: Current humidity, Target humidity, Tank full, Filter alert, Timer, Continuous mode, Auto mode. Settings: Target humidity (35%-85%), Timer (1-24 hours), Mode (CONTINUOUS runs until tank full/turned off; AUTO maintains set humidity; TIMER runs for set duration). Filter Reset: Press and hold FILTER button for 3 seconds after cleaning.
Three main operating modes for different needs.
Tip: Use AUTO mode for everyday operation to balance efficiency and comfort.
Regular maintenance ensures optimal performance and longevity.
CAUTION! Always unplug before cleaning. Never immerse unit in water.
Two methods for water removal: manual tank emptying or continuous drain.
Note: For continuous drain, unit must be level and hose unobstructed.
Built-in protections for safe operation.
UL Listed; complies with U.S. safety standards. EPA Energy Star certified for energy efficiency. Copyright © Honeywell International Inc. For support, visit www.honeywellhome.com or contact 1-800-332-1110. This product is designed for indoor residential use only.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Unit not turning on | No power | Check outlet; ensure plug is secure; try different outlet. |
| Little or no water collection | Low humidity, cold room, dirty filter | Check room humidity; ensure temp >41°F; clean air filter. |
| Tank full light on but tank empty | Float stuck, sensor issue | Remove tank, check float moves freely; reinsert tank firmly. |
| Unit running but not dehumidifying | Extreme cold, blocked airflow | Ensure room temp >41°F; clear obstructions from vents. |
| Loud or unusual noise | Loose parts, foreign object | Ensure unit is level; check for objects near fan; contact service. |
| Error code on display | Sensor fault, system error | Unplug for 5 minutes, then restart. If persists, contact support. |
Reset: Unplug for 10 minutes to reset control board.
Service: 1-800-332-1110; www.honeywellhome.com