Honeywell R-TP50 Dehumidifier Manual

The Honeywell R-TP50 is a high-capacity 50-pint dehumidifier designed for medium to large rooms, featuring automatic humidity control, a continuous drain option, a washable air filter, a full tank alert with auto-shutoff, a 24-hour timer, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Drainage Options 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Water Tank, Air Filter, Continuous Drain Hose Port, Casters for mobility, and Humidity Sensor.

Feature	Description
Humidity Control	Automatic humidity sensing and adjustment with user-selectable target (30%-80% RH)
Water Tank	Removable 50-pint capacity tank with handle and full-tank indicator
Continuous Drain	Hose connection port for automatic water drainage
Air Filter	Washable mesh filter to capture dust and particles
Timer Function	24-hour programmable on/off timer
Auto Shutoff	Automatically stops operation when tank is full
Turbo Mode	High-speed dehumidification for rapid moisture removal
Control Lock	Prevents accidental setting changes
Mobility	Four smooth-rolling casters for easy room-to-room movement
Energy Efficiency	Energy Star certified for lower power consumption

Installation & Placement

Unpack and inspect contents. Place on a level, stable floor surface.

Choose Location: Place in center of room or area with high humidity, away from walls and furniture for proper airflow.
Check Clearance: Ensure at least 12 inches of clearance on all sides, especially air intake and exhaust.
Level Surface: Unit must be level for proper operation and to prevent water leakage.
Ambient Temperature: Operate only in temperatures between 41°F (5°C) and 95°F (35°C).

WARNING! Do not place on soft surfaces like carpet without a solid barrier. Ensure the unit is upright for at least 24 hours before first use if it was tilted during transport.

First-Time Setup

Plug into a dedicated 115V AC outlet; follow initial setup steps.

Install Filter: Ensure the washable air filter is correctly seated in its slot.
Insert Water Tank: Push the empty tank firmly into place until it clicks.
Power On: Plug in the unit. The control panel will illuminate.
Set Humidity: Press the HUMIDITY button to select desired relative humidity level (e.g., 45%-55% for general comfort).
Select Mode: Choose between Continuous, Auto, or Turbo mode using the MODE button.
Set Timer (Optional): Use the TIMER button to program automatic start/stop times.

CAUTION! Use only a properly grounded outlet. Do not use an extension cord.

Specifications

Model: Honeywell R-TP50
Dehumidification Capacity: 50 pints per day (at 60°F, 60% RH)
Coverage Area: Up to 3000 sq. ft. (depending on humidity levels)
Tank Capacity: 50 pints (removable)
Operating Conditions: 41°F to 95°F (5°C to 35°C)
Power Supply: 115V AC, 60Hz
Power Consumption: 4.5 Amps (approx. 500 Watts)
Noise Level: ≤ 55 dB on standard mode
Dimensions (HxWxD): 24" x 15" x 12"
Weight: 42 lbs
Refrigerant: R-410A (environmentally friendly)

Controls and Settings

Access all functions via the digital control panel or included remote control.

Control Panel: POWER, MODE (Auto/Continuous/Turbo), HUMIDITY SET, FAN SPEED (Low/High), TIMER, FILTER ALERT RESET, CONTROL LOCK.

Remote: POWER, MODE, HUMIDITY UP/DOWN, TIMER, FAN SPEED.

Settings: Humidity Set Point (30%-80%), Fan Speed (Low for quiet operation, High for faster dehumidification), Mode (Auto - maintains set humidity, Continuous - runs constantly, Turbo - maximum moisture removal), Timer (program up to 24 hours).

Operation Modes

Three primary modes for different needs.

Auto Mode: Unit automatically cycles on/off to maintain your selected humidity level. Most energy-efficient for sustained use.
Continuous Mode: Runs constantly regardless of humidity level. Use for rapid initial drying in very damp spaces.
Turbo Mode: Fan runs at highest speed with compressor for maximum moisture removal. Use for fastest results; note increased noise level.

Tip: For everyday use in a basement or living area, Auto mode at 50% RH is recommended.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Empty Water Tank: Empty tank promptly when FULL indicator lights or auto-shutoff activates. Clean tank with mild detergent monthly.
Clean Air Filter: Remove and wash the filter under warm water every 2 weeks during heavy use, or monthly. Let dry completely before reinstalling. Press FILTER RESET button.
Exterior Cleaning: Unplug unit. Wipe exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
End-of-Season Storage: Empty and clean tank. Run unit in Fan Only mode for 30 minutes to dry internal components. Coil and store power cord. Store in a dry, covered location.

CAUTION! Always unplug the unit before any cleaning or maintenance. Never immerse the unit in water.

Drainage Options

Two methods for water removal: manual via tank or continuous via hose.

Manual Drainage (Tank): Unit will shut off when tank is full. Grip handle, pull tank straight out. Empty water into a sink or drain. Reinsert tank firmly.
Continuous Drainage (Hose): For unattended operation. Remove tank. Attach a standard 5/8" inner diameter garden hose (not included) to the drain port at the back. Ensure hose runs downward to a floor drain or sink. Unit will now drain continuously; tank full alert will not activate.

Note: For hose drainage, the drain destination must be lower than the dehumidifier's drain port.

Safety Features

Built-in protections for safe operation.

Auto Shutoff: Stops compressor and fan when water tank is full to prevent overflow.
Tip-Over Switch: Automatically powers off the unit if it is knocked over.
Control Lock: Locks the control panel to prevent accidental setting changes, especially useful around children.
Overload Protection: Protects the compressor from electrical overload.
3-Minute Restart Delay: Prevents rapid cycling of the compressor to extend its life.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This product is Energy Star certified. For support in the US and Canada, contact Honeywell Customer Care at 1-800-332-1110 or visit www.honeywellhome.com. Copyright © Honeywell International Inc.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not start	No power, tank not inserted, control lock on	Check outlet; ensure tank is fully inserted; press and hold CONTROL LOCK for 3 seconds to unlock.
Little or no water collection	Low humidity, cold room temp, dirty filter, settings	Ensure room temp >41°F; clean filter; set humidity lower than current room level; use Turbo mode.
Unit runs but stops quickly	Full tank, 3-minute compressor delay	Empty tank; wait 3 minutes for normal compressor restart cycle.
Loud or unusual noise	Unit not level, loose parts, fan hitting obstruction	Place on level surface; check for loose panels; ensure filter is clean and properly installed.
Error Code "E1" displayed	Temperature sensor fault	Unplug for 60 seconds, then restart. If persists, contact service.
Water leaking from unit	Tank not seated, clogged drain hose, unit tilted	Remove and reinsert tank; check hose for kinks; ensure unit is level.

Reset: Unplug unit for 5 minutes to reset control system.

Service: For repairs, contact authorized Honeywell service center. Do not attempt to disassemble the unit.