Honeywell R-TP30 Dehumidifier Manual

The Honeywell R-TP30 is a portable dehumidifier designed to remove excess moisture from the air in rooms up to 3000 cubic feet. It features a 30-pint per day capacity (at 80°F, 60% RH), auto-restart, continuous drain option, adjustable humidistat, full tank alert with auto-shutoff, washable air filter, and caster wheels for easy mobility. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Water Removal Methods 7. Maintenance & Cleaning 8. Energy Saving Tips 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control Panel, Air Intake Grille, Full Tank Indicator, Water Tank, Continuous Drain Hose Port, Caster Wheels, Air Filter, Handle.

Feature	Description
Capacity	Removes up to 30 pints per day (at 80°F, 60% RH)
Humidistat	Adjustable digital control for desired humidity level
Auto Shut-Off	Automatically stops when tank is full
Continuous Drain	Option for hose connection (hose not included)
Air Filter	Washable filter to capture dust and particles
Mobility	Four caster wheels for easy room-to-room movement
Auto Restart	Resumes previous settings after a power interruption
Timer Function	Programmable 1-24 hour on/off timer
Control Lock	Prevents accidental changes to settings
Quiet Operation	Designed for low noise in bedrooms and living areas

Installation & Placement

Unpack and inspect contents. Place on a flat, stable surface.

Positioning: Place unit at least 6-12 inches away from walls and furniture for proper airflow.
Room Size: Ideal for rooms up to 3000 cubic feet (approx. 20' x 15' x 8').
Environment: Operate in temperatures between 41°F and 95°F for optimal performance.
Power Connection: Plug directly into a grounded 120V AC, 60Hz outlet. Do not use extension cords.

WARNING! Ensure the unit is upright before operating. Do not place in tight, enclosed spaces that restrict airflow.

First-Time Setup

Power on the dehumidifier; follow control panel prompts.

Initial Run: Allow 24 hours for the unit to reach stated capacity as refrigerant settles.
Set Humidity Level: Press the HUMIDITY button to set desired level (40%-60% recommended).
Select Fan Speed: Choose between HIGH (faster dehumidification) or LOW (quieter operation).
Timer Setup (Optional): Use TIMER button to program automatic start/stop times.
Check Water Tank: Ensure empty tank is properly seated before operation.

CAUTION! Do not operate without the air filter installed. Handle the water tank with care to avoid spills.

Specifications

Model: Honeywell R-TP30
Dehumidification Capacity: 30 pints/day (at 80°F, 60% RH)
Recommended Room Size: Up to 3000 cubic feet
Water Tank Capacity: 1.8 gallons
Operating Temperature: 41°F to 95°F
Humidity Control: Adjustable digital humidistat (35%-85% RH)
Air Flow: Dual-speed fan
Power Source: 120V AC, 60Hz, 3.5A
Noise Level: ≤ 52 dB(A)
Dimensions (HxWxD): 15.4" x 11.4" x 19.9"
Weight: 30.9 lbs

Controls and Operation

Access all functions via the digital control panel. Front Panel: POWER, HUMIDITY, FAN SPEED, TIMER, LOCK.

Indicator Lights: POWER (green), FULL TANK (red), DEFROST (amber).

Basic Operation: Press POWER to turn on. Set target humidity with HUMIDITY buttons. Select fan speed (HIGH/LOW). The compressor will cycle on/off automatically to maintain set humidity. When tank is full, unit will shut off and red light will illuminate.

Advanced Features: TIMER for delayed start/stop (1-24 hours). CONTROL LOCK to prevent setting changes. Auto-defrost function activates in low temperatures to prevent coil freezing.

Water Removal Methods

Two options for water removal: manual bucket emptying or continuous drainage.

Manual Emptying (Bucket):
- When FULL TANK light illuminates, unit stops automatically.
- Turn off and unplug the unit.
- Grip handle, pull tank straight out.
- Carry tank by handle to sink or drain, empty completely.
- Replace tank securely; unit will resume operation if powered on.
Continuous Drain (Hose):
- Turn off and unplug unit.
- Remove water tank.
- Connect standard 5/8" inner diameter garden hose to drain port (hose not included).
- Route hose to floor drain or sink, ensuring downward slope.
- Replace tank; unit will operate continuously without shutdown for emptying.

Tip: For continuous drain, ensure hose is not kinked and drain location is lower than the drain port.

Maintenance & Cleaning

Unplug unit before any maintenance.

Air Filter: Clean every 2-4 weeks or as needed.
- Remove filter from rear grille.
- Vacuum or rinse with lukewarm water.
- Allow to dry completely before reinstalling.
Water Tank: Clean monthly to prevent mold/mildew.
- Empty tank.
- Wash with mild detergent and warm water.
- Rinse thoroughly and dry before replacing.
Exterior: Wipe with soft, damp cloth. Do not use abrasive cleaners.
Grilles and Vents: Keep free of dust and obstructions.
End-of-Season Storage: Empty and clean tank. Run fan for 24 hours in a warm room to dry internals. Coil and store in original box in dry location.

CAUTION! Never immerse unit in water. Do not use harsh chemicals or solvents.

Energy Saving Tips

Set humidity to 50-55% for comfort and efficiency.
Use in enclosed spaces; close doors and windows for best results.
Use LOW fan speed when noise is a concern; HIGH for maximum moisture removal.
Utilize timer to run only during humid periods (e.g., overnight).
Ensure room temperature is above 65°F for optimal compressor efficiency.
Regularly clean air filter to maintain airflow and reduce energy consumption.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. This product is ENERGY STAR® qualified. For support, visit www.honeywellhome.com or contact Honeywell Customer Care at 1-800-332-1110. Copyright © Honeywell International Inc.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not start	No power / Full tank	Ensure plugged in; outlet has power; empty water tank; wait 3 minutes after unplugging to restart.
Little or no water collection	Low humidity / Cold room / Dirty filter	Check room humidity; ensure room temp >41°F; clean air filter; allow 24 hrs for initial operation.
Red "Full" light is on but tank is not full	Float stuck / Tank not seated	Check for obstruction in tank; remove and reseat tank properly.
Unit runs but air feels warm	Normal operation	Warm exhaust air is normal during dehumidification process.
Amber "Defrost" light is on	Low temperature	Normal in cool environments; unit will resume automatically when coil thaws.
Unusual noise or vibration	Uneven surface / Loose parts	Place on level floor; check for loose panels or foreign objects inside unit.
Water leakage	Overfull tank / Loose hose connection	Empty tank immediately; check hose connection for continuous drain; ensure tank is properly positioned.

Reset: Unplug unit for 5 minutes, then restart. If issues persist, contact customer service.

Service: 1-800-332-1110; www.honeywellhome.com