Honeywell HDH-132 Dehumidifier Manual

The Honeywell HDH-132 is a high-capacity dehumidifier designed for residential and light commercial use, capable of removing up to 50 pints of moisture per day (at 80°F, 60% RH). It features an auto-restart function, continuous drain option, adjustable humidistat, washable air filter, full tank alert with auto shut-off, caster wheels for mobility, and low-temperature operation capability. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Draining Options 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, Water tank with handle, Casters for mobility, Air intake grille, Washable filter, Continuous drain hose port, Humidistat control.

Feature	Description
Moisture Removal	Up to 50 pints per day (80°F/60% RH)
Water Tank Capacity	1.6 gallons (with full tank alert)
Humidistat	Adjustable from 35% to 85% relative humidity
Auto Restart	Resumes previous settings after power interruption
Continuous Drain	Garden hose connection for unattended operation
Air Filter	Washable, removable filter for air quality
Low Temp Operation	Functions down to 41°F (5°C)
Digital Controls	LED display for humidity level and alerts
Turbo Mode	High-speed moisture removal
Caster Wheels	Four wheels for easy room-to-room mobility

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Choose location: Place in center of room or problem area, at least 12 inches from walls/furniture.
Check airflow: Ensure air intake and exhaust are unobstructed.
Level unit: Adjust feet if necessary for proper drainage.
Install drain hose (optional): Attach 5/8" garden hose to continuous drain port.
Plug into grounded 120V AC outlet.

WARNING! Do not place in closets or confined spaces. Ensure proper ventilation for optimal performance.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

Insert water tank: Ensure tank is properly seated and empty.
Set humidistat: Press POWER, then use UP/DOWN buttons to set desired humidity (45-50% recommended).
Select mode: Choose between CONTINUOUS or AUTO mode based on needs.
Check filter: Verify washable filter is clean and properly installed.
Test operation: Allow unit to run for 15 minutes to verify cooling and condensation.

CAUTION! Handle with care when moving; use two people if necessary. Unit contains refrigerant.

Specifications

Model: HDH-132
Moisture Removal: 50 pints/day (80°F, 60% RH)
Water Tank: 1.6 gallon capacity
Operating Conditions: 41°F to 95°F (5°C to 35°C)
Humidity Range: 35% to 85% RH (adjustable)
Air Flow: 165 CFM (cubic feet per minute)
Power: 115V, 60Hz, 4.5A, 520W
Refrigerant: R410A
Noise Level: 51 dB on low setting
Dimensions: 15.4" W × 11.4" D × 23.6" H
Weight: 41 lbs

Controls and Settings

Control Panel: POWER button, MODE selector, HUMIDITY UP/DOWN, TURBO button, FILTER indicator, FULL TANK indicator.

Display: Current room humidity, Set humidity, Mode indicators, Alert icons.

Modes: CONTINUOUS (runs until turned off), AUTO (cycles based on humidistat setting), TURBO (maximum moisture removal). Settings: Humidity level adjustment, 24-hour timer, Filter reset, Drain mode selection. Alerts: Full tank, Filter clean, Defrost cycle, Error codes.

Operation Modes

Three operating modes for different needs.

AUTO Mode: Unit cycles on/off to maintain set humidity level. Most energy efficient.
CONTINUOUS Mode: Runs continuously regardless of humidity. Use for rapid drying.
TURBO Mode: Maximum fan speed and cooling for fastest moisture removal.
Timer Function: Set 1-24 hour operation period.
Defrost Cycle: Automatic in low temperatures; compressor pauses, fan continues.

Tip: Start with AUTO mode at 50% humidity. Adjust based on comfort and conditions.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Check and empty water tank as needed.
Weekly: Clean air filter: Remove, wash with mild detergent, rinse, dry completely.
Monthly: Clean exterior with soft, damp cloth. Never use harsh chemicals.
Seasonally: Clean condenser coils with soft brush. Check drain hose for clogs.
Off-season: Empty completely, clean, dry, and store in upright position.

WARNING! Always unplug before cleaning. Do not immerse in water. Handle filter carefully.

Draining Options

Two methods for water removal: manual tank or continuous drain.

Manual Tank:
- Unit stops when tank is full (indicator lights)
- Remove tank by lifting handle
- Carry to drain, empty completely
- Replace tank securely
Continuous Drain:
- Attach 5/8" garden hose to drain port
- Route hose to floor drain or suitable outlet
- Ensure downward slope for gravity flow
- Select DRAIN mode in settings

CAUTION! Do not lift unit with full water tank. Empty before moving.

Safety Features

Auto Shut-off: When tank is full. Overload Protection: Thermal fuse protects compressor. Tip-over Switch: Stops operation if unit tips. Child Lock: Prevents accidental setting changes. Anti-frost Sensor: Prevents coil freezing in low temps.

Regulatory Information

UL Listed: Meets UL 474 safety standards. Energy Star: Compliant with EPA energy efficiency requirements. FCC Part 15: Class B digital device. Refrigerant: Contains R410A, comply with EPA Section 608 regulations. Copyright © Honeywell International Inc. For support, visit www.honeywellhome.com or contact 1-800-332-1110.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/full tank	Check outlet; reset GFCI; ensure tank is empty and properly seated.
Little/no water collection	Low humidity/cold temps	Check room humidity; ensure temp above 41°F; clean filter.
Loud noise/vibration	Uneven surface/obstruction	Level unit; check for objects near fan; tighten components.
Error code E1/E2	Sensor failure	Unplug for 10 minutes; restart. If persists, contact service.
Water leakage	Tank not seated/hose leak	Ensure tank properly installed; check hose connections; clean drain port.
Ice on coils	Low temperature	Unit will auto-defrost; raise room temp above 50°F if possible.
Musty odor	Dirty filter/stagnant water	Clean filter; empty and clean tank; run unit in ventilated area.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-332-1110; www.honeywellhome.com