Honeywell HDE010E Dehumidifier Manual

The Honeywell HDE010E is a compact, energy-efficient dehumidifier designed for small to medium-sized rooms. It features a 10-pint per day moisture removal capacity, automatic humidity control, continuous drain option, washable air filter, auto-defrost function, and a 2.0-liter water tank with full-tank alert and auto-shutoff. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control Panel, Air Intake Grille, Water Tank, Air Filter, Handle, Continuous Drain Hose Outlet, Power Cord.

Installation & Placement

Unpack and inspect contents. Place on a flat, stable, and level surface.

1. Choose location: Place in center of room or area with high humidity, away from walls and furniture for proper airflow.
2. Clearance: Ensure at least 12 inches of clearance on all sides, especially air intake and exhaust.
3. Ambient temperature: Operate within 41°F to 90°F (5°C to 32°C) for optimal performance.
4. Power connection: Plug directly into a grounded 120V AC, 60Hz outlet. Do not use extension cords.

WARNING! Do not place near heat sources or in direct sunlight. Ensure the unit is upright before operation.

First-Time Setup

Before first use, remove all packaging materials and prepare the unit.

1. Install the air filter: Ensure the washable filter is correctly seated in the rear grille.
2. Check water tank: Ensure the tank is correctly inserted and empty.
3. Power on: Plug in the unit. The Power Indicator LED will illuminate.
4. Set desired humidity: Use the Humidity Level buttons to select your target relative humidity (recommended 45%-55% for comfort).
5. Select mode: Choose between Continuous mode or Auto mode (with humidistat control).

CAUTION! Always handle the unit with dry hands. Do not operate with a damaged cord or plug.

Specifications

• Model: HDE010E
• Dehumidification Capacity: 10 pints per day (at 80°F, 60% RH)
• Water Tank Capacity: 2.0 liters (0.53 gallons)
• Operating Conditions: 41°F to 90°F (5°C to 32°C)
• Humidity Control Range: 35% to 85% Relative Humidity (adjustable)
• Air Flow: Standard for room size up to 150 sq. ft.
• Power Supply: 120V AC, 60Hz
• Power Consumption: Low energy consumption design
• Noise Level: Low noise operation
• Dimensions (HxWxD): Approx. 12.2" x 8.3" x 14.6"
• Weight: Approx. 10.6 lbs

Controls and Settings

Access all functions via the front control panel or included remote (if applicable).

Control Panel: POWER Button, Humidity UP/DOWN Buttons, Timer Button, Filter Reset Indicator, Full Tank Indicator, Mode Indicator LEDs.

Modes: Auto Mode (maintains set humidity), Continuous Mode (runs continuously until tank is full or turned off), Timer (set 1-24 hours for automatic on/off).

Settings: Adjust target humidity level. Enable/disable audible alert for full tank. Reset filter maintenance reminder after cleaning.

Operation Modes

The dehumidifier offers multiple modes for flexible use.

1. Auto Mode: Unit cycles on/off automatically to maintain the user-set humidity level. Most energy-efficient for maintaining comfort.
2. Continuous Mode: Unit runs continuously until the water tank is full or manually turned off. Use for rapid moisture removal.
3. Timer Mode: Program the unit to turn on or off after a set delay (1-24 hours). Press Timer button and use Humidity buttons to set hours.
4. Auto-Defrost: If coil temperature drops too low, the unit will temporarily pause operation to defrost, then resume automatically.

Tip: For best results in living spaces, start with Continuous mode to reduce high humidity, then switch to Auto mode.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Emptying the Water Tank: When the Full Tank LED lights, power off, pull out the tank, carry to sink, empty, and reinsert firmly.
2. Cleaning the Air Filter: Every two weeks (or as needed), remove the filter, rinse with lukewarm water, let air dry completely, and reinstall.
3. Cleaning the Exterior: Unplug unit. Wipe cabinet with a soft, damp cloth. Do not use abrasive cleaners or solvents.
4. End-of-Season Storage: Empty and dry the tank completely. Clean the filter. Coil the power cord. Store in a cool, dry place in its original box if possible.

WARNING! Always unplug the unit before any maintenance. Never immerse the unit in water.

Continuous Drain Option

For unattended, long-term operation, use the continuous drain feature.

1. Locate the drain outlet on the back of the unit.
2. Remove the outlet cap.
3. Connect a standard 5/8" inner diameter garden hose (not included). Ensure hose is secure.
4. Route the hose to a floor drain, sink, or sump pump. The hose path must slope downward without kinks.
5. With hose connected, the unit will bypass the internal tank and drain continuously. The Full Tank alert will not activate.

CAUTION! Ensure the drain hose is lower than the drain outlet on the dehumidifier. Check hose periodically for clogs.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Honeywell International Inc. Honeywell and related marks are used under license from Honeywell International Inc. For support, visit www.honeywellhome.com or contact customer service at 1-800-332-1110.

Troubleshooting

Reset: Unplug the unit for 5 minutes, then plug back in to reset the electronic controls.

Service: For issues not resolved above, contact Honeywell Customer Service at 1-800-332-1110 or visit www.honeywellhome.com.