Honeywell DR65A3000/U Dehumidifier Manual

The Honeywell DR65A3000/U is a 65-pint dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drain option, washable filter, auto-restart after power interruption, full tank alert with auto-shutoff, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Storage Instructions 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, washable air filter, water collection tank with handle, continuous drain hose connection, casters for mobility, and carrying handles.

FeatureDescription
Capacity65 pints per day (at 60°F, 90% RH)
Humidity ControlAdjustable from 35% to 85% relative humidity
Digital DisplayShows current humidity, settings, and alerts
Water TankFull tank alert with auto-shutoff
Continuous DrainOption for hose connection (hose not included)
Air FilterWashable mesh filter for dust removal
Auto-RestartResumes previous settings after power outage
Timer FunctionProgrammable 1-24 hour on/off timer
MobilityFour casters and side handles for easy movement
Energy EfficiencyEnergy Star certified

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

  1. Remove all packaging materials and tape.
  2. Position unit: Allow at least 12-18 inches clearance on all sides for proper airflow.
  3. Check environment: Operate in temperatures between 41°F and 95°F.
  4. Install drain hose (optional): Attach to drain outlet and route to floor drain or sink.
  5. Plug into grounded 120V AC outlet.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

  1. Initial dry-out: Run unit continuously for first 24 hours in very damp areas.
  2. Set desired humidity: Use UP/DOWN buttons to select 45-50% for typical comfort.
  3. Select mode: Choose between Continuous, Auto, or Timer mode.
  4. Check drain setup: Ensure tank is properly seated or hose securely connected.

CAUTION! Handle with care when moving; unit contains refrigerant.

Specifications

Controls and Settings

Control Panel: POWER, MODE, TIMER, UP/DOWN buttons, FILTER RESET indicator.

Display Icons: Power, Tank Full, Filter Clean, Timer, Continuous Mode, Auto Mode.

Humidity Setting: Adjust between 35-85% RH in 5% increments. Modes: Auto (maintains set humidity), Continuous (runs constantly), Timer (programmable operation). Filter Alert: LED illuminates when filter needs cleaning. Tank Full Alert: Unit shuts off automatically when tank is full.

Operation Modes

Auto Mode: Maintains set humidity level automatically. Continuous Mode: Runs continuously regardless of humidity. Timer Mode: Set 1-24 hours for automatic start/stop.

  1. Press POWER to turn unit on.
  2. Press MODE to cycle through Auto, Continuous, or Timer.
  3. In Timer mode, use UP/DOWN to set hours, then press TIMER to activate.
  4. Monitor current humidity on digital display.

Tip: For energy savings, set humidity to 50% in Auto mode.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

  1. Clean air filter every 2-4 weeks: Remove, wash with mild detergent, dry completely.
  2. Empty water tank: When full indicator lights, turn off unit, remove tank, empty, replace.
  3. Clean exterior: Unplug unit, wipe with damp cloth, then dry.
  4. Clean tank: Monthly, wash with mild soap, rinse thoroughly.
  5. End-of-season cleaning: Follow storage instructions below.

WARNING! Always unplug before cleaning. Never immerse unit in water.

Storage Instructions

Proper storage prevents damage during non-use periods.

  1. Clean unit thoroughly following maintenance instructions.
  2. Empty and dry water tank completely.
  3. Coil power cord and secure with twist tie.
  4. Store in upright position in dry, protected area.
  5. Cover with cloth or plastic to prevent dust accumulation.

CAUTION! Do not store with water in tank to prevent mold and mildew.

Safety Information

Important safety precautions for proper operation.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Honeywell International Inc. For support, visit www.honeywellhome.com or contact 1-800-474-2147. Energy Star certified: Meets energy efficiency guidelines set by the U.S. EPA.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit not turning onPower issueCheck power outlet; ensure plug is fully inserted; test outlet with another device.
Not removing moistureSettings/environmentCheck humidity setting; ensure room temperature is between 41-95°F; clean filter.
Water leakingTank/drain issuesEnsure tank is properly seated; check drain hose connection; empty full tank.
Loud noisePlacement/obstructionEnsure unit is level; check for objects near fan; clean filter.
Filter light onDirty filterClean filter as instructed; press and hold FILTER button for 3 seconds to reset.
Ice on coilsLow temperatureTurn off unit; allow ice to melt; move to warmer area or wait for room to warm.

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-474-2147; www.honeywellhome.com

Honeywell DR65A3000/U Dehumidifier Manual © - All Rights Reserved 2025