Honeywell DR65A3000 Dehumidifier Manual

The Honeywell DR65A3000 is a 65-pint capacity dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drainage option, washable air filter, auto-restart after power interruption, turbo mode for faster dehumidification, and a 24-hour timer. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, Water tank with full indicator, Continuous drainage port, Washable filter, Casters for mobility, Handle for carrying.

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

1. Remove all packaging materials and tape from unit.
2. Position unit: Place at least 12 inches from walls and furniture for proper airflow.
3. Ensure level surface: Unit must be level for proper operation and drainage.
4. Check clearance: Maintain 20 inches overhead for air intake and exhaust.
5. Install filter: Ensure washable filter is properly seated in filter compartment.

WARNING! Do not operate in temperatures below 41°F (5°C). Keep away from heat sources and direct sunlight.

First-Time Setup

Plug into grounded outlet; follow initial setup steps.

1. Power on: Plug into 120V AC outlet; press POWER button.
2. Set humidity level: Use UP/DOWN buttons to set desired humidity (45-50% recommended).
3. Select mode: Choose between CONTINUOUS or AUTO mode based on needs.
4. Check drainage: Ensure water tank is properly inserted or connect hose for continuous drainage.
5. Test operation: Allow unit to run for 24 hours to establish baseline performance.

CAUTION! Always use grounded outlet. Do not use extension cords.

Specifications

• Model: DR65A3000
• Capacity: 65 pints per day (at 60°F, 60% RH)
• Coverage Area: Up to 4,500 sq. ft. (depending on conditions)
• Water Tank: 1.8 gallons (removable)
• Operating Temperature: 41°F to 95°F (5°C to 35°C)
• Power Source: 115V, 60Hz, 7.0A
• Noise Level: 51 dB on normal mode
• Dimensions: 15.4" W × 11.4" D × 24.3" H
• Weight: 41.9 lbs
• Refrigerant: R410A

Controls and Settings

Control Panel: POWER, MODE, TIMER, FAN SPEED, HUMIDITY SET, FILTER RESET.

Display Indicators: Current humidity, Set humidity, Tank full, Filter clean, Timer, Turbo mode, Continuous mode.

Humidity Control: Adjust between 35%-85% in 5% increments. Fan Speed: NORMAL or TURBO. Mode Selection: AUTO (maintains set humidity), CONTINUOUS (runs constantly). Timer: Program on/off in 1-hour increments up to 24 hours. Filter Alert: Illuminates when filter needs cleaning (approximately every 250 hours).

Operation Modes

AUTO Mode: Unit cycles on/off to maintain set humidity level. CONTINUOUS Mode: Runs continuously regardless of humidity level. TURBO Mode: Maximum fan speed for fastest dehumidification.

1. Select AUTO for energy-efficient operation in living spaces.
2. Use CONTINUOUS for basement drying or after water damage.
3. Engage TURBO when rapid moisture removal is needed.
4. Combine TIMER with modes for scheduled operation.

Tip: Start with CONTINUOUS mode for 24-48 hours in very damp areas, then switch to AUTO.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean filter: Remove and wash every 2-4 weeks depending on use.
2. Empty water tank: When FULL indicator lights or daily during heavy use.
3. Clean exterior: Wipe with damp cloth; never use harsh chemicals.
4. Clean water tank: Monthly with mild detergent; rinse thoroughly.
5. Check coils: Annually for dust buildup; vacuum if necessary.
6. Off-season storage: Empty tank, clean unit, store upright in dry place.

WARNING! Always unplug before cleaning. Never immerse unit in water.

Drainage Options

Two drainage methods: Manual (water tank) or Continuous (hose).

Manual Drainage: Use removable tank. When FULL indicator lights: 1. Turn unit off. 2. Pull tank straight out. 3. Carry to drain location. 4. Empty completely. 5. Reinsert firmly until click.

Continuous Drainage: 1. Remove tank. 2. Attach 5/8" ID garden hose to drainage port (not included). 3. Route hose to floor drain or suitable outlet. 4. Ensure downward slope for proper drainage. 5. Unit will operate continuously without tank full shutdown.

Energy Saving Tips

• Set humidity to 45-50% for comfort and efficiency.
• Use AUTO mode instead of CONTINUOUS when possible.
• Keep doors and windows closed during operation.
• Use TIMER to run during peak humidity hours only.
• Ensure proper placement for optimal airflow.
• Clean filter regularly to maintain efficiency.
• Consider continuous drainage to avoid compressor cycling.

Note: Each 5% increase in humidity setting can reduce energy use by approximately 10%.

Regulatory Information

UL Listed. FCC Part 15: Class B digital device; complies with interference limits. EPA Energy Star certified. California Proposition 65 warning: This product contains chemicals known to cause cancer and reproductive harm. Manufactured for Honeywell International Inc. For support, visit www.honeywellhome.com or contact 1-800-474-2147.

Troubleshooting

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-474-2147; www.honeywellhome.com