Honeywell DR65A1000 Dehumidifier Manual

The Honeywell DR65A1000 is a high-capacity 65-pint dehumidifier designed for medium to large rooms up to 1500 sq. ft. It features automatic humidity control, continuous drain option, washable air filter, auto-restart, full tank alert with auto shut-off, turbo mode for faster moisture removal, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, Water tank with handle, Continuous drain hose connection, Washable air filter, Casters for mobility, Carrying handles.

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

1. Choose location: Place in center of room away from walls/furniture for optimal air flow.
2. Check clearance: Minimum 12 inches from walls, 18 inches from ceiling.
3. Level surface: Ensure unit is level to prevent water leakage.
4. Power connection: Plug into dedicated 120V AC outlet; avoid extension cords.
5. Initial setup: Allow unit to stand upright for 24 hours if transported sideways.

WARNING! Do not place in temperatures below 41°F (5°C). Ensure proper ventilation around unit.

First-Time Setup

Power on dehumidifier; configure initial settings.

1. Insert filter: Ensure washable filter is properly installed in front grille.
2. Set humidity level: Press HUMIDITY button to select desired level (45-50% recommended).
3. Select mode: Choose between Normal, Turbo, or Continuous operation.
4. Set timer: Program 24-hour timer if needed for automatic operation.
5. Test operation: Run unit for 30 minutes to verify proper condensation and drainage.

CAUTION! Handle water tank carefully when full. Empty before moving unit.

Specifications

• Model: DR65A1000
• Capacity: 65 pints per day (at 60°F, 60% RH)
• Coverage Area: Up to 1500 square feet
• Water Tank: 1.8 gallons (6.8 liters)
• Power: 120V, 60Hz, 6.5A
• Energy Consumption: 590 Watts (Turbo mode)
• Noise Level: 51 dB (Normal mode)
• Dimensions: 15.4" W × 11.4" D × 24.3" H
• Weight: 41.9 lbs
• Operating Temperature: 41°F to 95°F (5°C to 35°C)
• Refrigerant: R410A

Controls and Settings

Control Panel: POWER button, HUMIDITY adjustment, MODE selection, TIMER, TURBO button, FILTER indicator.

Display Icons: Current humidity %, Set humidity %, Full tank alert, Filter clean reminder, Timer indicator, Turbo mode indicator.

Humidity Control: Adjust between 35-85% RH in 5% increments. Modes: Normal (standard operation), Continuous (runs until tank full), Turbo (maximum dehumidification). Timer: Program 1-24 hours for automatic on/off cycles. Filter Alert: Flashing indicator when filter needs cleaning (approximately every 250 hours).

Operation Modes

Normal Mode: Standard energy-efficient operation. Turbo Mode: Maximum moisture removal for high humidity. Continuous Mode: Runs until tank is full (with auto shut-off).

1. Press POWER to turn unit on.
2. Set desired humidity level using HUMIDITY buttons.
3. Select mode: Press MODE to cycle through options.
4. Monitor display: Current humidity shown in real-time.
5. Empty tank: When full indicator lights, power off and empty water tank.

Tip: For best results, keep doors and windows closed during operation.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean air filter: Remove monthly, wash with warm water, dry completely before reinstalling.
2. Empty water tank: Empty regularly to prevent overflow and mineral buildup.
3. Clean exterior: Wipe with damp cloth; never use harsh chemicals or abrasives.
4. Check drain hose: Ensure continuous drain hose is clear of obstructions.
5. Off-season storage: Empty tank completely, clean filter, store in dry location.

WARNING! Unplug unit before any maintenance. Do not immerse in water.

Draining Options

Two drainage methods: Manual (bucket) or Continuous (hose).

Manual Drainage: Use removable 1.8-gallon tank. When full indicator lights, power off, remove tank by handle, empty into sink/drain, replace securely.

Continuous Drainage: Connect standard garden hose (not included) to drain port. Ensure hose runs downward to floor drain. Unit will operate continuously until turned off or humidity set point reached.

CAUTION! Ensure hose connection is tight to prevent leaks. Check local codes for drainage requirements.

Energy Saving Tips

• Set humidity to 45-50% for optimal comfort and efficiency
• Use Normal mode instead of Turbo when humidity is moderate
• Utilize 24-hour timer to run only during high humidity periods
• Keep doors and windows closed during operation
• Ensure air filter is clean for maximum airflow
• Place unit in coolest part of room for best performance
• Use continuous drain to avoid energy used for tank full detection

Regulatory Information

UL Listed: Meets UL 474 safety standards. Energy Star Certified: Meets EPA energy efficiency guidelines. FCC Part 15: Class B digital device. California Proposition 65 Warning: This product contains chemicals known to cause cancer and birth defects. For support, visit www.honeywellhome.com or contact 1-800-332-1110. Manufactured for Honeywell International Inc.

Troubleshooting

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-332-1110; www.honeywellhome.com