Honeywell DH45PWKN Dehumidifier Manual

The Honeywell DH45PWKN is a high-capacity 45-pint dehumidifier designed for medium to large rooms up to 4500 sq. ft. It features digital humidity control, an auto-restart function, a continuous drain option, a washable filter, a full-bucket alert with auto-shutoff, and a 24-hour timer. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Digital control panel, 45-pint water collection bucket, washable air filter, continuous drain hose port, casters for mobility, and humidity sensor.

Installation & Placement

Unpack and inspect contents. Place on a level, stable surface away from walls and furniture for proper airflow.

1. Choose location: Place in center of room or area with high humidity (e.g., basement, laundry room).
2. Clearance: Allow at least 12 inches of space on all sides, especially air intake and exhaust.
3. Check flooring: Ensure surface is dry and can support weight (unit is heavy when bucket is full).
4. Power connection: Plug directly into a grounded 120V AC outlet; avoid extension cords.

WARNING! Do not place near heat sources or in areas with temperatures below 41°F (5°C). Ensure all packaging materials are removed.

First-Time Setup

Plug in the unit; the control panel will illuminate.

1. Set target humidity: Press the HUMIDITY button to select desired level (45%-50% recommended).
2. Choose mode: Select NORMAL, TURBO, or DRY (for laundry) using the MODE button.
3. Set timer (optional): Use TIMER button to program automatic shut-off or start-up.
4. Check filter: Ensure washable filter is installed correctly behind the front grille.
5. Bucket placement: Insert empty water collection bucket securely until it clicks.

CAUTION! Handle the unit with care; use two people if moving. Do not operate without the filter installed.

Specifications

• Model: Honeywell DH45PWKN
• Dehumidification Capacity: 45 pints per day (at 80°F, 60% RH)
• Coverage Area: Up to 4500 sq. ft. (medium to large rooms)
• Humidity Control Range: 30% to 90% relative humidity (adjustable in 5% increments)
• Water Bucket Capacity: 1.8 gallons (approx. 45 pints)
• Power Requirements: 120V AC, 60Hz, 4.5 Amps
• Noise Level: ≤ 51 dB on normal mode
• Dimensions (HxWxD): 23.6" x 15.4" x 11.8"
• Weight: 40.8 lbs
• Refrigerant: R410a (environmentally friendly)
• Certifications: Energy Star, ETL Listed

Controls and Settings

Access all functions via the digital control panel on top of the unit.

Control Panel: POWER, HUMIDITY (+/-), MODE (Normal/Turbo/Dry), TIMER (1-24 hours), FILTER ALERT (indicator light), BUCKET FULL (indicator light).

Humidity Setting: Adjust target humidity from 30% to 90%. Modes: NORMAL (standard operation), TURBO (high-speed dehumidification), DRY (for drying laundry). Timer: Set unit to turn off or on after 1-24 hours. Filter Alert: Illuminates when filter needs cleaning. Bucket Full Alert: Flashes and unit shuts off when bucket is full.

Operating Modes

Normal Mode: Standard operation for maintaining set humidity. Turbo Mode: Maximum moisture removal for very damp conditions. Dry Mode: Continuous operation ideal for drying laundry indoors.

1. Press POWER to turn unit on.
2. Use HUMIDITY buttons to set desired room humidity level.
3. Press MODE to cycle through Normal, Turbo, or Dry settings.
4. For continuous drain: Attach hose to drain port and route to floor drain or sink.
5. Monitor bucket: Empty when FULL indicator lights or bucket is full.

Tip: For best efficiency, keep doors and windows closed in the room being dehumidified.

Maintenance & Cleaning

Unplug unit before performing any maintenance.

1. Empty water bucket: Remove, empty, and replace securely. Clean bucket monthly with mild detergent.
2. Clean air filter: Remove filter every 2 weeks (or when FILTER light illuminates). Rinse under warm water, let dry completely before reinstalling.
3. Exterior cleaning: Wipe cabinet with soft, damp cloth. Do not use harsh chemicals or abrasives.
4. Coil cleaning: Gently vacuum condenser coils every 3-6 months to remove dust (access from rear grille).
5. End-of-season cleaning: Follow storage instructions below if not using for extended period.

WARNING! Never operate without filter. Do not immerse unit in water. Ensure bucket is correctly seated to prevent leaks.

Storage & Winterization

If storing unit during cold months or not using for more than 2 weeks:

1. Unplug power cord from outlet.
2. Empty and clean water bucket; allow to dry completely.
3. Clean air filter and let dry.
4. Run unit in FAN ONLY mode (if available) for 30 minutes in a warm room to dry internal components.
5. Coil and store power cord. Cover unit with plastic bag or original box.
6. Store in a dry, protected area above 41°F (5°C).

CAUTION! Do not store in freezing temperatures. Moisture inside can freeze and damage components.

Regulatory Information

This dehumidifier complies with FCC Part 15 Class B digital device limits. It is ETL listed to UL standard 474. Copyright © Honeywell International Inc. Honeywell® is a trademark of Honeywell International Inc. For support, visit www.honeywellhome.com or contact 1-800-474-2147.

Troubleshooting

Reset: Unplug unit for 5 minutes, then plug back in to reset control board.

Service: 1-800-474-2147; www.honeywellhome.com