Honeywell DH45PWGN Dehumidifier Manual

The Honeywell DH45PWGN is a 45-pint portable dehumidifier designed for medium to large rooms up to 3000 sq. ft. It features digital humidity readout, auto defrost, continuous drain option, washable filter, automatic shut-off, and 24-hour timer. Operates on 115V/60Hz. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operating Modes 7. Maintenance & Cleaning 8. Storage & Winterization 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, 45-pint water tank, Washable air filter, Continuous drain hose connection, Casters for mobility, Auto defrost function.

Feature	Description
Digital Humidity Display	Shows current room humidity and set target
45-Pint Capacity	Removes up to 45 pints per day at 80°F/60% RH
Auto Defrost	Prevents coil freezing in low temperatures
Continuous Drain Option	Hose connection for unattended operation
Washable Filter	Captures dust and particles; reusable
Automatic Shut-Off	Turns off when tank is full
24-Hour Timer	Program on/off cycles
Castor Wheels	Easy mobility between rooms
Turbo Mode	Maximum moisture removal speed
Energy Star Certified	Energy efficient operation

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place at least 12 inches from walls and furniture for proper airflow.
Level Surface: Ensure unit is level to prevent water leakage.
Power Connection: Plug directly into 115V grounded outlet. Do not use extension cords.
Drain Setup: For continuous drainage, attach hose to drain port and route to floor drain.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure proper ventilation around unit.

First-Time Setup

Power on dehumidifier; follow initial setup procedure.

Install Filter: Ensure washable filter is properly seated in filter compartment.
Set Humidity Level: Press HUMIDITY button to set desired RH (30%-80%).
Select Mode: Choose between Continuous, Auto, or Turbo mode based on needs.
Test Operation: Allow unit to run for 15 minutes to verify proper condensation.

CAUTION! Handle water tank carefully when full (approx. 10 lbs). Empty before moving.

Specifications

Model: DH45PWGN
Capacity: 45 pints per day (at 80°F/60% RH)
Coverage Area: Up to 3000 sq. ft.
Water Tank Capacity: 1.8 gallons
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Power Requirements: 115V/60Hz, 4.5 Amps
Noise Level: 51 dB on normal setting
Dimensions: 15.4" W x 11" D x 24.3" H
Weight: 41 lbs
Refrigerant: R410A

Controls and Settings

Digital Control Panel: POWER, MODE, HUMIDITY, TIMER, TURBO, FILTER RESET.

Display Indicators: Current humidity, Set humidity, Full tank alert, Filter clean reminder, Defrost mode.

Humidity Control: Set between 30%-80% RH in 5% increments. Modes: CONTINUOUS (runs constantly), AUTO (cycles based on set humidity), TURBO (maximum dehumidification). Timer: Program 1-24 hours for automatic start/stop. Filter Reset: Press after cleaning filter to reset reminder light.

Operating Modes

Select mode based on humidity conditions and needs.

Auto Mode: Unit cycles on/off to maintain set humidity level (recommended for most use).
Continuous Mode: Runs constantly regardless of humidity (use for very damp conditions).
Turbo Mode: Maximum fan speed for fastest moisture removal.
Timer Mode: Set unit to turn on/off at specific times (1-24 hour programming).

Tip: For energy savings, set humidity to 50-55% in living areas, 45-50% in basements.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Check and empty water tank when FULL indicator lights.
Monthly: Clean washable filter with warm water and mild detergent. Air dry completely.
Seasonally: Clean exterior with soft, damp cloth. Never use harsh chemicals.
Annually: Inspect coils for dust buildup; clean gently with soft brush.

WARNING! Always unplug unit before cleaning. Never immerse in water.

Storage & Winterization

Proper storage prevents damage during non-use periods.

Clean thoroughly: Empty and clean water tank. Wash and dry filter.
Drain completely: Run unit in continuous mode for 30 minutes to dry internal components.
Coil storage: Store in upright position to prevent oil migration.
Cover: Use dust cover or store in original box in dry location.

CAUTION! Do not store in temperatures below 32°F (0°C).

Regulatory Information

UL Listed: Meets UL 474 safety standards. Energy Star Certified: Exceeds energy efficiency requirements. EPA Refrigerant Compliance: Uses R410A, an environmentally friendly refrigerant. FCC Part 15: Class B digital device compliant. Copyright © Honeywell International Inc. For support, visit www.honeywellhome.com or contact 1-800-332-1110.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	Power/Temperature	Check power connection; ensure room temp above 41°F.
Little/no water collection	Humidity setting/Filter	Lower humidity setting; check and clean filter.
Water leaking	Tank/Placement	Ensure tank properly seated; check unit is level.
Loud noise/vibration	Placement/Components	Ensure level surface; check for loose parts.
Frost on coils	Low temperature	Auto defrost should activate; move to warmer area.
Filter light on	Dirty filter	Clean filter; press FILTER RESET button.
Display not working	Power/Control board	Check power source; unplug for 5 minutes then restart.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-332-1110; www.honeywellhome.com