Honeywell 848987003122 Dehumidifier Manual

The Honeywell 848987003122 is a portable dehumidifier designed to remove excess moisture from the air in rooms up to a specified size. It features adjustable humidity control, continuous drainage capability, an auto-defrost function, a full tank alert with auto-shutoff, washable air filter, and caster wheels for easy mobility. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operating Instructions 7. Maintenance & Cleaning 8. Continuous Drainage 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Dehumidifier unit with water tank, Control Panel, Air Filter, Casters, Drain Hose Outlet, and Power Cord.

Feature	Description
Humidity Control	Adjustable digital or dial control to set desired room humidity level
Water Tank	Removable bucket with handle and full-tank indicator/auto-shutoff
Continuous Drainage	Outlet for connecting a hose (not included) for automatic water removal
Auto Defrost	Automatically defrosts coils in low-temperature conditions
Washable Air Filter	Captures airborne particles; can be cleaned and reused
Caster Wheels	Four wheels for easy portability
Control Panel	Power button, humidity setting, fan speed, timer functions
Full Tank Alert	Indicator light and audible alert when tank is full
Power Cord Storage	Compartment or hooks for neat cord storage

Installation & Placement

Unpack and inspect contents. Place on a flat, stable, and level surface.

Clearance: Ensure at least 12-18 inches of clearance on all sides, especially near air intake and exhaust grilles.
Environment: Operate in an enclosed space (e.g., room, basement) with doors and windows closed for best efficiency.
Temperature Range: Operate within the specified temperature range (typically 41°F to 95°F / 5°C to 35°C).
Power Source: Plug directly into a grounded 120V AC, 60Hz outlet. Do not use an extension cord.

WARNING! Do not place near heat sources or in direct sunlight. Ensure the unit is upright before operating.

First-Time Setup

Before first use, prepare the dehumidifier.

Install the Filter: Ensure the washable air filter is correctly seated in its slot.
Check the Tank: Ensure the water collection tank is correctly inserted and clicks into place.
Position the Unit: Roll the unit to its desired location using the caster wheels.
Power On: Plug in the unit. The control panel may light up. Press the POWER button.
Initial Settings: Set your desired humidity level (start with 50% RH) and fan speed.

CAUTION! Allow the unit to stand upright for at least 30 minutes after moving before turning it on, especially if it was tilted.

Specifications

Model: Honeywell 848987003122
Type: Portable Dehumidifier
Capacity: [e.g., 50 pints per day] at specified conditions (80°F, 60% RH).
Room Size Coverage: Up to [e.g., 3000 sq ft] under standard conditions.
Water Tank Capacity: [e.g., 1.8 gallons / 6.8 liters].
Humidity Control Range: 35% - 85% Relative Humidity (adjustable).
Operating Temperature: 41°F to 95°F (5°C to 35°C).
Power Source: 120V AC, 60Hz.
Amps/Watts: [e.g., 5.0 Amps, 600 Watts].
Refrigerant: R410a (ozone-safe).
Noise Level: [e.g., ≤50 dB on low setting].
Dimensions & Weight: [e.g., 15.4" W x 11" D x 24.3" H, 41 lbs].

Controls and Settings

Access functions via the control panel on the top of the unit.

Control Panel Buttons/Display: POWER, HUMIDITY SET (+/-), FAN SPEED (High/Low), TIMER (On/Off), FILTER ALERT Reset.

Humidity Setting: Press HUMIDITY buttons to set your desired room humidity level (e.g., 45%, 50%, 55%). The unit will cycle on and off to maintain this level.

Fan Speed: Select HIGH for maximum moisture removal or LOW for quieter operation.

Timer: Set the unit to automatically turn ON or OFF after a set number of hours.

Continuous Mode: Some models allow you to override the humidity setting for constant operation until the tank is full.

Operating Instructions

For normal daily use to control humidity.

Ensure the water tank is properly seated.
Plug the unit into a dedicated wall outlet.
Press POWER. The unit will start in the last used mode or default settings.
Use the HUMIDITY buttons to select your desired moisture level (e.g., 45-50% for general comfort).
Select FAN SPEED (HIGH for faster dehumidification, LOW for quieter operation).
The compressor and fan will run until the desired humidity is reached, then cycle off. It will restart when humidity rises.
When the tank is full, the unit will shut off automatically and the FULL indicator will light. Empty the tank to resume operation.

Tip: For initial drying of a very damp room, set the humidity level to the lowest setting (or Continuous mode) and use HIGH fan speed.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Cleaning the Air Filter: Turn off and unplug the unit. Remove the filter every 2-4 weeks. Rinse with lukewarm water and let air dry completely before reinstalling. Press the FILTER RESET button if equipped.
Cleaning the Water Tank: Empty the tank regularly. To clean, wash with a mild detergent and water. Rinse thoroughly. Do not use abrasive cleaners.
Cleaning the Exterior: Wipe the cabinet with a soft, damp cloth. Do not use harsh chemicals, solvents, or abrasives.
End-of-Season Storage: If storing for an extended period, empty and clean the tank. Let the unit run in FAN ONLY mode for a few hours to dry the interior coils. Coil the power cord. Store in a cool, dry place.

CAUTION! Always unplug the unit before performing any maintenance. Never immerse the unit in water.

Continuous Drainage

For unattended operation, connect a garden hose (not included) for continuous water drainage.

Ensure the unit is unplugged and the water tank is empty.
Remove the tank and locate the drain outlet on the back or side of the unit.
Remove the drain outlet cap.
Connect a standard 5/8" inner diameter garden hose (ensure it is not kinked).
Route the hose to a floor drain, sink, or sump pump where water can flow freely downhill.
Replace the water tank. The unit will now drain continuously. The full-tank alert will not activate.

Note: For proper drainage, the hose must run downward without loops or sags that could trap water.

Regulatory Information

This dehumidifier complies with relevant U.S. safety and performance standards. It uses refrigerant R410a. For electrical safety, it is ETL listed or certified. Copyright and trademarks are property of Honeywell International Inc. For support, visit www.honeywellhome.com or contact Honeywell Customer Care at 1-800-474-2147.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not start	No power, full tank, timer set	Ensure unit is plugged in; outlet has power; empty water tank; check timer settings.
Little or no water collection	Room humidity already low, cold room, dirty filter	Check room humidity with a hygrometer; ensure room temp is above 41°F; clean the air filter.
Unit runs but stops quickly	Desired humidity level reached, auto-defrost cycle	This is normal cycling. If in a cold room, the auto-defrost may cycle the compressor off periodically.
Water leaking from unit	Tank not seated, hose connection loose, internal drain pan clogged	Remove and reinsert tank firmly; check hose connection; unplug unit and inspect/clean internal drain area.
Loud or unusual noise	Unit not level, fan hitting obstruction, loose part	Place unit on level floor; check for and remove any obstruction near fan; ensure cabinet panels are secure.
"Filter" light is on	Air filter needs cleaning	Clean the washable air filter as per instructions. Press and hold FILTER RESET button for 3 seconds.

Reset: Unplug the unit for 5 minutes, then plug it back in to reset the electronic controls.

Service: For persistent issues, contact Honeywell Customer Care at 1-800-474-2147 or visit www.honeywellhome.com. Do not attempt to repair the sealed refrigeration system yourself.